EDIFIER Comfo Q Manual

EN 1. Power ON/OFF
Open or close the case to power on/off.
2. First pairing
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER Comfo Q" from your device list to connect.
3. Pairing for new device
1. Place the earbuds in the case and keep it open.
2. Press and hold the button on the case for 3s until white and
orange LED blink.
Note: For subsequent use, the earbuds will automatically connect
to the device used last time.
4. Multipoint connection
①
②
③
1. Pair device A with the earbuds manually and keep the earbuds in
the case.
2. Re-enter Bluetooth pairing and select "EDIFIER Comfo Q" in device
B settings to connect.
3. Select "EDIFIER Comfo Q" again in device A settings to complete
the multipoint connection.
Note: For subsequent use, the earbuds will automatically reconnect
to the two devices used last time.
5. Reset/left & right connection
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED will blink until the
reset is complete.
Note: This operation will clear pairing records, reconnect left & right
earbuds and restore factory settings.
6. Charging
Input: 5V 200mA (Earbuds)
Note: Make sure the USB port is completely dry before charging.
7. Controls
Note:
1. "x2" double tap; "x3" triple tap;
2. Download EDIFIER ConneX App to customize more control settings.
Comfo Q
Model: EDF200200
Open-ear True Wireless Earbuds
Manual
Bluetooth
EDIFIER Comfo Q
A
L
x2
x2
x2
x3
Bluetooth
EDIFIER Comfo Q
3s
3s
5V 1A (Charging case)
R
x2
x2
x2
x3
Bluetooth
EDIFIER Comfo Q
Bluetooth
EDIFIER Comfo Q
A
B
x3