Page 1
Instructions. Keep these User Instructions for reference. This product helps protect against certain airborne contaminants. Misuse may result in sickness or death. For proper use, see supervisor, User Instructions or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
List of Warnings within these User Instructions 1. This product helps protect against certain airborne contaminants. Misuse may result in sickness or death. For proper use, see supervisor, User Instructions or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
1. Do not use this respirator for entry into contaminated atmospheres. 2. This respirator will not be effective for escape from atmospheres: - that are oxygen deficient, or - where contaminant concentrations are immediately dangerous to life or health (IDLH), or - that contain unknown contaminants 2.
Page 4
3. Place nose clip on nose completely closing off nostrils. You should not be able to breathe through your nose. Reposition if necessary. Fig. 1 shows proper donning of a 3M™ 5500 Series Respirator. 4. While leaving the contaminated area, BREATH ONLY THROUGH YOUR MOUTH.
Item Number Part Number Description 5002 Escape Only Cartridge, Acid Gas 5012 Escape Only Cartridge, Acid Gas/N95 Rubber Gasket Cartridge Retainer 510E Escape Only Mouthpiece and Nose Clip Exhalation Valve Exhalation Valve Seat Exhalation Valve Stem Escape Only Valve Cover 3 - 9 Respirator Housing * Items with a part number indicate available replacement parts...
49˚C) solution of mild detergent and water. Rinse in fresh, clean potable water. WARNING: This product contains natural rubber latex which may cause allergic reactions. 3. Clean respirator housing (excluding cartridge), with 3M 504 Respirator Wipes or by immersing in a...
Page 7
8. The clean and dry respirator should be stored in a clean and dry environment in its original clear storage bag or 3M replacement clear storage bag and zipper sealed when not in use. Store bag in a secure way to prevent tears, punctures or other damage.
(angled toward cartridges and away from exhalation valve). 3. Do not use any type of lubricant to position replacement mouthpiece. 4. Insert respirator into original or 3M replacement clear storage bag and reseal zipper. Cartridge Replacement (See Fig. 2 as reference for cartridge replacement) If the cartridge is used in an escape event or if it becomes damaged, it must be replaced.
Need help?
Do you have a question about the Respirator 5500 Series and is the answer not in the manual?
Questions and answers