1. Manuals
  2. Brands
  3. HIKOKI Manuals
  4. Cut-off machines
  5. CC14STD
  6. Handling instructions manual

HIKOKI CC14STD Handling Instructions Manual

Hide thumbs Also See for CC14STD:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Cut-Off Machine
Model CC 14SF
Handling instructions
NOTE:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It
is recommended that these INSTRUCTIONS be kept readily
available as an important reference when using this power tool.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CC14STD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKOKI CC14STD

Summary of Contents for HIKOKI CC14STD

  • Page 1 Cut-Off Machine Model CC 14SF Handling instructions NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool.

  • Page 2: General Operational Precautions

    16. Remove adjusting keys and wrenches. Form the GENERAL OPERATIONAL PRECAUTIONS habit of checking to see that keys and adjusting wrenches are removed from the tool before turning WARNING! When using electric tools, basic safety it on. precautions should always be followed to reduce the risk 17.

  • Page 3: Specifications

    SPECIFICATIONS Voltage (by areas)* (110V, 115V, 120V, 127V) (220V, 230V, 240V) Input 1640W* 2000W* 115 mm × 130 mm 70 mm × 235 mm 90° Max. cutting dimensions Height × width 100 mm × 106 mm 45° No-Load Speed 3800 /min Max.

  • Page 4: How To Operate

    CAUTION: Workpiece material Vise (B) It does not necessarily cut rapidly when putting more force on the handle. Vise (A) Too much force on the handle will put excessive Clutch pressure on the motor and reduce its capacity. Do not fail to switch OFF the switch after operation is completed and pull the plug out.

  • Page 5: Maintenance And Inspection

    CAUTION: Repair, modification and inspection of HiKOKI Power Dimension of workpiece Tools must be carried out by an HiKOKI Authorized to be cut Service Center. Vise (B) This Parts List will be helpful if presented with the...
  • Page 7 ITEM ITEM PART NAME PART NAME SUB COVER (A) CHAIN NUT M5 BOLT WASHER M8 MACHINE SCREW (W/WASHERS) M5 × 16 BOLT SPLIT PIN D3 × 15 FLANGE BOLT (A) COVER SPACER WASHER M16 HEX. SOCKET HD.BOLT M10 × 20 ROLL PIN D5 ×...
  • Page 8 Hitachi Koki Co., Ltd. Code No. C99142211 Printed in China...

This manual is also suitable for:

Cc 14sf

Table of Contents