Advertisement
50 Gallon Smart Foam Unit
Service Manual
FI-50N-SM
READ ALL INSTRUCTIONS BEFORE USING OR
READ ALL INSTRUCTIONS BEFORE USING OR
SERVICING THIS UNIT. KEEP THIS MANUAL IN A
SERVICING THIS UNIT. KEEP THIS MANUAL IN A
LOCATION THAT IS READILY AVAILABLE TO USERS
LOCATION THAT IS READILY AVAILABLE TO USERS
AND SERVICE TECHNICIANS.
AND SERVICE TECHNICIANS.
English (Original Instructions)
English (Original Instructions)
Scan this code for
service manual
Advertisement
Table of Contents
Related Manuals for Foamit FI-50N-SM
Summary of Contents for Foamit FI-50N-SM
- Page 1 50 Gallon Smart Foam Unit Service Manual FI-50N-SM READ ALL INSTRUCTIONS BEFORE USING OR READ ALL INSTRUCTIONS BEFORE USING OR SERVICING THIS UNIT. KEEP THIS MANUAL IN A SERVICING THIS UNIT. KEEP THIS MANUAL IN A LOCATION THAT IS READILY AVAILABLE TO USERS LOCATION THAT IS READILY AVAILABLE TO USERS AND SERVICE TECHNICIANS.
- Page 2 Always flush the unit with fresh water thoroughly when switching from an alkaline to an acid or an acid to an alkaline. Model: FI-50N-SM V20240809 • Page 2 of 14...
-
Page 3: Protect The Environment
• Crescent wrench (2x) • #2 Phillips head screwdriver • ⁷/16 in. (11 mm) open-ended wrench • #3 Phillips head screwdriver • Flat head screwdriver • Hose cutters • Thread seal tape • Knife Model: FI-50N-SM V20240809 • Page 3 of 14... - Page 4 6. Replace the mixing mesh and screen into the back of the tee. Screw the stainless hose barb back into the tee. Note: It is recommended to use a pipe thread sealant when reinstalling the stainless hose barb back into the tee fitting. Model: FI-50N-SM V20240809 • Page 4 of 14...
-
Page 5: Tank Assembly
- includes gasket Plate adapter assembly for TNK-50N 8 PLA-TNK50 includes bolt fittings and thumb nuts Swivel caster - stainless - 5 in. 9 CST5SS-L clearance - 4 in. wheel - with lock Model: FI-50N-SM V20240809 • Page 5 of 14... - Page 6 Wheel - 10 in. - non-marking Flat washer for 5/8 in. od pipe or axle - 12 FW58 stainless steel - 0.64 in. id x 1.2 in. od x 0.05 in. thk WHLA-AXL26 Model: FI-50N-SM V20240809 • Page 6 of 14...
-
Page 7: Back Plate Assembly
⅜ in. id blue hose - hybrid TPE - 11 H38BL-F available per ft. Stainless tee assembly - ½ in. FPT 12 SST12HB38A-MX x ⅜ in. SS hose barb - includes mixing media and screen Model: FI-50N-SM V20240809 • Page 7 of 14... - Page 8 Stainless steel union - ¼ in. FPT Water separator - 20 CFM - ¼ in. FPT 11 WS-20CFM ports Air fitting ¼ MPT x plug - nickel-plated 12 AP14 brass WSA-20CFM* *Optional assembly sold separately Model: FI-50N-SM V20240809 • Page 8 of 14...
- Page 9 Item number Description Stainless tee ½ FPT ⅜ barb - no 6 SST12HB38 mixing media Mixing assembly - portable foam - 7 MXA- PF includes mixing media and screen NVA-NV14-PF SST12HB38A-MX Model: FI-50N-SM V20240809 • Page 9 of 14...
- Page 10 Serrated flange nut - stainless - ½ in. 14 AP14 Air fitting ¼ MPT x plug - nickel-plated brass 16 AG100 Air gauge - ⅛ in. NPT - 100 PSI dry model RGA-R25-PF-SM Model: FI-50N-SM V20240809 • Page 10 of 14...
- Page 11 1/ 4 in. MPT x 3/8 in. barb Hex head poly bushing ¾ MPT 6 HHPB3414 x ¼ FPT Ball valve - PVC - 3/ 4 NPT to 3/ 4 FNPT 7 BVPVC34MF Buna seal SCTNA-PF Model: FI-50N-SM V20240809 • Page 11 of 14...
- Page 12 1/ 4 in. hose AKSS5814: Stainless anti-kink spring for ½ in. hose Item number Description AKSS5814 Anti-kink spring - stainless - for 5/8 in. id 5 AKSS5814 and 1/ 4 in. id bonded hose SMWA-HA5814BL-50 Model: FI-50N-SM V20240809 • Page 12 of 14...
- Page 13 1/2 in. NPT and 3/8 in. FNPT wand - 6 PW12M38F6 black UHMW - 6 in. long Spray tip - 65 degree - 15.0 GPM - 7 ST65150SS stainless - 3/8 MPT SMWA Model: FI-50N-SM V20240809 • Page 13 of 14...
-
Page 14: Optional Attachment
MPT x 1/2 in. barb 1/2 in. id blue hose - hybrid TPE - 3 H12BL-F available per ft. Ear clamp - Oetiker - stainless steel - 4 EC12 for 1/2 in. hose Model: FI-50N-SM V20240809 • Page 14 of 14...
Need help?
Do you have a question about the FI-50N-SM and is the answer not in the manual?
Questions and answers