Security - Asus VINTAGE-AE1 Manual

5.6.3 5.6.3 5.6.3 5.6.3 5.6.3

Security

Security Security Security Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Boot Sector Virus Protection
Change Supervisor Password Change Supervisor Password
Change Supervisor Password Change Supervisor Password Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default N o t I n s t a l l e d
After you set a password, this item shows I n s t a l l e d
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press <Enter>. The message "Password Uninstalled" appears.
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section "1.9 Jumpers" for information
on how to erase the RTC RAM.
5 - 3 2 5 - 3 2 5 - 3 2
5 - 3 2 5 - 3 2
: Not Installed
: Not Installed
[Disabled]
<Enter> to change
password.
<Enter> again to
disabled password.
N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d.
N o t I n s t a l l e d
I n s t a l l e d I n s t a l l e d. I n s t a l l e d I n s t a l l e d
C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p