Advertisement
Quick Links
1. Assemble and charge
Remove the protective film on the robot
and docking station
Turn on the robot
" I "means ON , " O "means OFF
Reminder: Cannot charge when
product is turned off.
Ｑｕｉｃｋ Ｓｔａｒｔ Ｇｕｉｄｅ
Install the side brushes
Charging
Place the robot at Docking Station and make sure
to align the charging electrodes
twinkling means charging.
turn off means fully charged.
A full charge takes 5 hours.
1
Placement of the charging base /
connection of power supply
* Place the docking station on an open place.
* Connect the power supply and tidy up the power
Click
cord to avoid twining.
Advertisement
Related Manuals for OKP M210
Summary of Contents for OKP M210
- Page 1 Ｑｕｉｃｋ Ｓｔａｒｔ Ｇｕｉｄｅ 1. Assemble and charge Remove the protective film on the robot Install the side brushes Placement of the charging base / and docking station connection of power supply * Place the docking station on an open place. * Connect the power supply and tidy up the power Click cord to avoid twining.
- Page 2 2 . Using environment preparation Tidy up the room Organize the items on the floor, such as If the rug at home has fringed edges, wires, slippers and other sundries to avoid please put the edges under the rug in affecting the operation of the robot advance.
-
Page 3: How To Use Buttons
3 . How to use buttons Indicator Meaning Single press: Start/pause Double press: Automatic return and charge Robot status Indicator status Entering Wi-Fi pairing mode Keep pressing for 6 seconds: Blue light on Cleaning Blue light on Pause/standby Purple/blue light flash Charging Low battery-automatic Red light on... - Page 4 Method I : Scan the following QR code, and then download and install App as prompted. OKP_2.4G OKP_5G Method II : Search "OKP" in the App store, download and install the OKP app. Tips: * Follow the guidance in the OKP app to register, login, and pair the robot.
-
Page 5: Maintenance
5 .1 Maintenance * When cleaning and maintaining the robot and its accessories, please unplug the charging stand. Open the faceplate and take out the Open the dust bin latch and dump the Warning dust bin garbage The HEPA Filter should not touch the water. - Page 6 5 .2 Maintenance * When cleaning and maintaining the robot and its accessories, please unplug the charging stand. 1. Clean the anti-drop sensor to ensure the sensitivity of the sensor 6. Clean the Anti-collision sensors to ensure sensitive obstacle avoidance 2.
Need help?
Do you have a question about the M210 and is the answer not in the manual?
Questions and answers