HP 8886 - Photosmart Camera Dock Digital Docking Station User Manual page 6

When the dialogue box below appears onscreen, the installation is finished. Click Finish
to complete setup. You will be instructed to reboot your computer.
12. After rebooting, click on the Device Manager tab in System Properties, which you
access from the Windows Control Panel. You should see an entry for the driver you
installed under the 1394 Bus Controller item. If the driver is not listed, please go back
to Step 1 and reinstall the card.
The Windows 98 installation CD includes the Texas 1394 OHCI driver, so you do not
need an installation CD or diskette. After the installation has finished and the computer
has rebooted, you may connect 1394/FireWire devices to it.
The first time you hot-plug a 1394 device into one of the host card ports, you will be
asked to insert your Windows 98 installation CD. However, you won't need to insert the
CD to add additional 1394 devices; they should automatically appear in the Device
Manager after they are connected.
6