Download Print this page
Polygroup SUMMER WAVES SKIMMERPLUS SFX600 Owner's Manual
Polygroup SUMMER WAVES SKIMMERPLUS SFX600 Owner's Manual

Polygroup SUMMER WAVES SKIMMERPLUS SFX600 Owner's Manual

Filter pump for above ground swimming pools
Hide thumbs Also See for SUMMER WAVES SKIMMERPLUS SFX600:

Advertisement

Available languages

Available languages

Quick Links

SUMMER WAVES
SKIMMERPLUS
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
For answers to common questions, setup videos and troubleshooting tips, please visit
support.polygroupstore.com or call Customer Service: (888) 919-0070
DO NOT RETURN PRODUCT TO STORE
Should you encounter a problem with your Polygroup
be made directly to Polygroup
®
review the FAQ and instructional videos at support.polygroupstore.com. If you are still unable to correct the problem, please contact Polygroup
Customer Service at (888) 919-0070. Please have the product type, model number and your purchase receipt ready, so that our Customer Service
Representative can assist you in resolving the problem. You may be asked to return all or part of the product for inspection and/or repair. Do not return
any product to Polygroup
®
without a Return Merchandise Authorization number.
Polygroup
Trading Limited, (hereinafter "Polygroup
®
workmanship for 180 days from the date of purchase. Original Purchaser must retain proof of such purchase in the form of an original store sales receipt and must
produce such upon request by Polygroup
applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in Polygroup
Consequential damages, including claims for loss of water, pool chemicals, damage, or labor are not covered under this Limited Warranty. This Warranty will be
declared invalid should the Purchaser modify or repair the product themselves or by unauthorized persons; use non-Polygroup
use the product in contravention of the manufacturer's Instructions; use improper voltage; abuse the product in any way; or through accident or negligence. Normal
wear-and-tear is not covered under this Warranty, nor are acts of God outside the control of Polygroup
grow through the ground cloth and/or pool liner, as this is not a manufacturing defect.
IN NO EVENT SHALL Polygroup
PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or other jurisdictions, do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FOR ABOVE GROUND SWIMMING POOLS
SFX600 / SFX1000 / SFX1500 models
Product, please DO NOT return the product to the place of purchase. All Warranty claims must
®
. Prior to contacting Customer Service, please first review the Troubleshooting Guide in the Installation Manual, or
LIMITED WARRANTY
") warrants to the original purchaser only, the SFX type Electric Filter Pump against defects in material and
®
or its designated agents. Warranty claims cannot be processed without a valid proof of purchase. This Limited Warranty
®
, THEIR AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER
®
DISTRIBUTED BY: Polygroup
Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong
OWNER'S MANUAL
FILTER PUMP
®
please visit www.polygroupstore.com
. Polygroup
will not be held responsible for grasses that may
®
®
Trading Limited
®
®
To order parts and accessories,
's sole discretion.
®
parts or accessories with the product;
®
Manual#
09C3A4USA015
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the SUMMER WAVES SKIMMERPLUS SFX600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Polygroup SUMMER WAVES SKIMMERPLUS SFX600

  • Page 1 Warranty claims cannot be processed without a valid proof of purchase. This Limited Warranty ® applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in Polygroup ’s sole discretion.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Warnings 3 ~6 Preliminary Steps, Important Notes & Pump Power Info Parts List 7 ~ 8 Setup Instructions, Use of Pump 9 ~ 10 Motor Care, Pump Maintenance Filter Cartridge Use & Care Pool Water Care Pump Disassembly & Storage 12 ~ 13 Pump Servicing Instructions 13 ~ 16...
  • Page 3 CUSTOMERS THAT PURCHASE POOLS MAY BE REQUIRED BY LOCAL OR STATE LAW TO INCUR ADDITIONAL EXPENSES WHEN INSTALLING A POOL, IN ORDER TO COMPLY WITH STATE OR LOCAL LAWS REGARDING FENCING AND OTHER SAFETY REQUIREMENTS. CUSTOMERS SHOULD CONTACT THEIR LOCAL BUILDING CODE ENFORCEMENT OFFICE FOR FURTHER DETAILS. POLYGROUP IS NOT RESPONSIBLE FOR ANY ADDITIONAL EXPENSES THAT YOU MAY INCUR.
  • Page 4: Electrocution Risk

    Turn on the pump for the recommended hours daily. If you are unsure of the time frames please refer to support.polygroupstore.com for the recommended Pump Operation Hours based on pool types and sizes. Clean and replace filter cartridge frequently. Replace only with genuine Polygroup / Summer Waves Brand filter cartridge.
  • Page 5: First Aid

    OWNER’S MANUAL First Aid 1. Keep a working phone and a list of emergency numbers near the pool. 2. Become certified in cardiopulmonary resuscitation (CPR). In the event of an emergency, immediate use of CPR can make a lifesaving difference. Special Warning 1.
  • Page 6: Installer Responsibilities

    ASME American Society of Mechanical Engineers Two Park Avenue, New York NY 10016-5990 Contact: 800-843-2763 (U.S. & Canada) 973-882-1170 (outside North America) www.asme.org NSPI National Spa and Pool Institute (see APSP) UL Underwriters Laboratories 333 Pfingsten Road,Northbrook IL 60062-2096 Contact: 877-854-3577 or 847-272-8800 www.ul.com NSF NSF International P.O.
  • Page 7: Preliminary Steps

    2. All electrical components shall be installed in accordance with Article 680 of the 2017 National Electrical Code (NEC ) or its latest approved edition. ® ® 3. The maximum capacity of 1” diameter chlorine tablets of Polygroup ’s patented Filter Cartridge (U.S. Pat. 7,005,062): ® a. Type D cartridges: 2 b.
  • Page 8 Outside Pool Wall Inside Pool Wall Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday. Extended operating days and hours during peak season requirements.
  • Page 9: Setup Instructions

    OWNER’S MANUAL SETUP INSTRUCTIONS Before assembly, take a few minutes to identify and become familiar with all the parts. WARNING: CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL. Skimmer Installation 2. Slide open the Top Cover and take out the parts inside.
  • Page 10 Pump Installation 8. Slide close the Top Cover onto the Skimmer Canister 7. From inside the Skimmer Canister , snap the pins of the Weir into the pivot slots, one after another. The Weir should now stand upright but not stuck. Push-in Inside Pool Wall Weir installation...
  • Page 11: Pump Maintenance

    Contact and consult your local pool supplies store for solutions/treatment, and maintain an adequate pH level of pool water (see POOL WATER CARE, p. 12). 5. Dispose of any used filter media in accordance with applicable regulations/legislation. 6. Always use genuine Polygroup ® Summer Waves ®...
  • Page 12: Pool Water Care

    Leaf Net with handle – for removing leaves, trash, insects, etc. from the pool g. Chlorine Dispenser (inside Polygroup ’s patented Filter Cartridge U.S. Pat. 7,005,062) - for dispensing 1" chlorine tablets ONLY. See p. 7 FILTER PUMP ®...
  • Page 13: Pump Servicing Instructions 13

    OWNER’S MANUAL the parts, and liberally lubricate the Skimmer Gasket Rubber Seal with petroleum jelly. Then reassemble them back onto the Skimmer Canister b. Remove the Motor Assembly by turning open the Motor Seal Nut . Clean and dry completely the Pump. Then see STEP 3: Pump Reassembly/Replacement (p.
  • Page 14 5. Slowly take out the Motor Assembly . Be careful not to lose the Rubber Nozzle or Canister Gasket You may need to reach inside the Canister to free the Pump Motor. STEP 2: Rotor Inspection/Replacement The Pump is consisted of a Rotor Assembly and its related parts.
  • Page 15 OWNER’S MANUAL STEP 3: Pump Reassembly/Replacement 1. Lubricate the Canister Gasket , then insert it back into the groove (inner IMPORTANT: make sure that the cord of the groove for SFX600/SFX1000) at the bottom of the Skimmer Canister Motor Assembly is placed through the Motor Seal Nut BEFORE replacing the Pump.
  • Page 16 OWNER’S MANUAL 3. Once the Motor is correctly aligned, match the threads of the Motor Seal to that of the Canister, and tighten by twisting the Nut counterclockwise. IMPORTANT: make sure the Nut and Canister are not cross-threaded; otherwise leaks may occur. Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
  • Page 17: Troubleshooting Guide

    OWNER’S MANUAL TROUBLESHOOTING GUIDE WARNING: UNPLUG THE POWER CORD BEFORE TROUBLESHOOTING THE FILTER PUMP. Problem Cause Solution A Plug the GFCI Power Cord Set to a grounded power outlet. Then press the A Pump not plugged in RESET button to start the Pump. 1.
  • Page 18: Replacement Parts Ordering Info

    OWNER’S MANUAL REPLACEMENT PARTS ORDERING INFO SFX600 SFX1000 SFX1500 Description Part # P58PP1954W05 P58PP1954W05 P58PP1954W05 Motor Seal Nut P58PP1954G8U P58PP1954G8U P58PP1954G8U Rubber Nozzle P58182601K01 P58182601K01 P58185201K01 Pump Motor Assembly P58X0601C000 P58X1001C000 P58X1500C000 Canister Gasket / Motor Seal P58147800K01 P58147800K01 P58164800K01 P58PP1950W05 P58PP1950W05 P58PP1950W05...
  • Page 19: Manual Del Usuario

    Las reclama ciones de garantía no pueden procesarse sin un justificante de compra ® válido. Esta garantía limitada solo se aplica al comprador original del producto y se limita a la reparación o sustitución del producto, a discreción de Polygroup ®...
  • Page 20 ÍNDICE Advertencias 3 ~ 6 Pasos Preliminares Y Notas Importantes Acerca De La Bomba De Filtración Y Potencia De La Bomba Lista De Piezas 7 ~ 8 Instrucciones De Montaje Y Uso De La Bomba 9 ~ 10 Cuidado Del Motor De La Bomba Y Mantenimiento De La Piscina Uso Y Cuidado Del Cartucho De Filtro Cuidado Del Agua De La Piscina Desmontaje Y Almacenamiento De La Bomba De La Piscina...
  • Page 21 ADICIONALES AL INSTALAR UNA PISCINA, EN CUMPLIMIENTO DE LAS LEYES ESTATALES O LOCALES RELATIVAS AL VALLADO Y OTROS REQUISITOS DE SEGURIDAD. LOS CLIENTES DEBEN PONERSE EN CONTACTO CON LAS AUTORIDADES LOCALES CORRESPONDIENTES PARA MÁS INFORMACIÓN. POLYGROUP NO ES RESPONSABLE POR GASTOS ADDICIONALES QUE PUEDAN OCCURIR.
  • Page 22 Limpie y cambie el cartucho de la bomba del filtro con frecuencia. Reemplazar solo con un cartucho de filtro original de la marca Polygroup...
  • Page 23 MANUAL DEL USUARIO filtro de la bomba debe colocarse de manera que no pueda ser usado por los niños pequeños como medio de acceso a la piscina. No deje juguetes dentro de la piscina al terminar de usarla, ya que los juguetes y objetos similares podrían atraer a los niños a la piscina. 3.
  • Page 24 APSP Association of Pool & Spa Professionals (formerly National Spa and Pool Institute) 2111 Eisenhower Avenue, Suite 500 Alexandria VA 22314-4679 Contacto: 703-838-0083 www.apsp.org ASME American Society of Mechanical Engineers Two Park Avenue, New York NY 10016-5990 Contacto: 800-843-2763 (U.S. & Canada) 973-882-1170 (outside North America) www.asme.org NSPI National Spa and Pool Institute (see APSP) UL Underwriters Laboratories...
  • Page 25: Pasos Preliminares

    4. Los sistemas de bomba de filtración de la serie SFX son fabricados por Polygroup con el número de control de ETL 4000608 y 4006317, con doble aislamiento y ®...
  • Page 26 Parte Fuera de La Piscina Parte Interior de La Piscina Si tuviera algún problema, llame al Servicio al cliente al número (888) 919-0070 de 8:00 a 17:00 (MST) Lun, Jue, Vie. Días y horas ampliables durante la temporada alta.
  • Page 27: Instrucciones De Montaje

    MANUAL DEL USUARIO INSTRUCCIONES DE MONTAJE Antes de montar el producto, dedique unos minutos a comprobar el contenido y familiarícese con todas las piezas. ADVERTENCIA: COLOQUE ESTE PRODUCTO APARTADO DE LA PISCINA A FIN DE EVITAR QUE LOS NIÑOS SE SUBAN A ÉL Y ACCEDAN A LA PISCINA. Instalación del skimmer (rebosador) 2.
  • Page 28: Uso De La Bomba

    Instalación de la bomba 8. Deslice y cierre la Cubierta superior sobre la Caja del skimmer 7. Desde dentro de la caja del skimmer , enganche los pines de la Compuerta en las ranuras de los pivotes, uno después de otro. La Compuerta ahora debe estar de pie, pero no atascada.
  • Page 29: Uso Y Cuidado Del Cartucho De Filtro

    (ver CUIDADO DEL AGUA DE LA PISCINA, p. 12). 5. Elimine cualquier filtro usado en conformidad con las regulaciones/leyes correspondientes. 6. Siempre use Cartuchos de filtro Polygroup Summer Waves ; se encuentran disponibles ®...
  • Page 30: Cuidado Del Agua De La Piscina

    Net para hojas con asa - para eliminar hojas, basura, insectos, etc. de la piscina g. Dispensador de cloro (dentro del Cartucho de filtro patentado de Polygroup ® (Patente de EE. UU. 7,005,062) - para dispensar SOLAMENTE pastillas de cloro de 2.54 cm.
  • Page 31 MANUAL DEL USUARIO 3. Desmonte la Bomba: a. Deslice y abra la Cubierta superior , retire el Cesto del colador , el Cartucho de filtro y cualquier pastilla de cloro que haya quedado dentro, y desenganche la Compuerta . Limpie y seque todas las partes, y lubrique el Sello de goma del empaque del skimmer abundantemente con vaselina.
  • Page 32 5. Saque lentamente el ensamblaje del motor . Tenga cuidado de no perder la Boquilla de goma o el Empaque de la caja Podría tener que alcanzar dentro de la caja para liberar el motor de la bomba. PASO 2: Inspección/Reemplazo del rotor La Bomba consiste de un Ensamblaje del rotor y sus partes relacionadas.
  • Page 33 MANUAL DEL USUARIO PASO 3: Reemplazo/Reensamblaje de la Bomba 1. Lubrique el Empaque de la caja , luego insértelo de regreso en la IMPORTANTE: asegúrese que el cable del ranura (ranura interna para SFX600/SFX1000) en la parte inferior de la Conjunto del motor esté...
  • Page 34 3. Una vez que el motor esté correctamente alineado, aparee las roscas de la Tuerca del sello del motor a las de la Caja y luego ajuste la Tuerca hacia la izquierda. IMPORTANTE: asegúrese que la Tuerca y la Caja no tengan las roscas cruzadas;...
  • Page 35: Guía De Resolución De Problemas

    MANUAL DEL USUARIO GUÍA DE RESOLUCIÓN DE PROBLEMAS ADVERTENCIA: DESENCHUFE EL CABLE DE ALIMENTACIÓN ANTES DE SOLUCIONAR CUALQUIER PROBLEMA EN LA BOMBA DE FILTRACIÓN. Problema Causa Solución A Enchufe el set de cable de alimentación GFCI a un tomacorriente correctamente A La Bomba no está...
  • Page 36: Información Sobre El Pedido De Piezas De Repuesto

    MANUAL DEL USUARIO OWNER’S MANUAL INFORMACIÓN SOBRE EL PEDIDO DE PIEZAS DE REPUESTO SFX600 SFX1000 SFX1500 Llave Descripción N.º De Pieza P58PP1954W05 P58PP1954W05 P58PP1954W05 Tuerca de sellado del motor P58PP1954G8U P58PP1954G8U P58PP1954G8U Boquilla P58182601K01 P58182601K01 P58185201K01 Conjunto del motor P58X0601C000 P58X1001C000 P58X1500C000 Junta del cartucho...
  • Page 37: Limited Warranty

    . Prior to contacting Customer Service, please first review the Troubleshooting Guide in the Installation Manual, ® or review the FAQ and instructional videos at support.polygroupstore.com. If you are still unable to correct the problem, please contact Polygroup ® Customer Service at (888) 919-0070. Please have the product type, model number and your purchase receipt ready, so that our Customer Service Representative can assist you in resolving the problem.
  • Page 38 TABLE OF CONTENTS Warnings ................................. 3 ~ 5 Parts List ................................6 ~7 Setup Instructions ............................7 ~ 9 Maintenance ..............................9 Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday. Extended operating days and hours during peak season requirements.
  • Page 39: Warnings

    OWNER′S MANUAL IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following : READ AND FOLLOW ALL INSTRUCTIONS Keep for Future Reference. Failure to follow these warnings and instructions can result in serious injury or death to users, especially children WARNING DANGER WARNING...
  • Page 40 9. Keep your pool clean and clear. The deepest part of pool must be visible at all times from the outside barrier of the pool. 10. Pool shall be located at a minimum distance of 6ft (1.83m) from any receptacle, and all 125-volt 15- and 20-ampere receptacles located within 20ft (6.0m) of the pool shall be protected by a ground fault circuit interrupter (GFCI), where distances are by measuring the shortest path the supply cord of an appliance connected to the receptacle would follow, without piercing a floor, wall, ceiling, doorway with hinged or sliding door, window opening, or other effective permanent barrier, to the inside wall of the pool.
  • Page 41 OWNER′S MANUAL 3. Layers of Protection. 4. Pool and Spa Emergency Procedures for Infants and Children. 5. Be Safety Aware Copies of the above brochures are available free from the APSP. Go to: www.APSP.org Safety Education Programs and Materials Educational programs and materials (i.e., seminars, workshops, brochures, videos, instructional guides) are available from the APSP, other aquatic safety groups, and by private firms.
  • Page 42: Parts List

    PARTS LIST • THIS LADDER IS DESIGNED AND MANUFACTURED FOR THE SPECIFIC POOL WALL HEIGHT. • REMOVE AND SECURE THE LADDER WHEN POOL IS NOT OCCUPIED! • CHECK THE COLOR CODES INDICATED ON THE LADDER WARNING BRACKETS FOR REPLACEMENT PARTS ORDERING. 36”...
  • Page 43: Setup Instructions

    OWNER′S MANUAL 36” Pool 42” Pool 48” Pool 52” Pool Wall Height Wall Height Wall Height Wall Height Description Color Code Part # Qty. Part # Qty. Part # Qty. Part # Qty. Color A P5943M60000A P5943M60000A P5943M60000A P5943M60000A Color B P5943M60000A P5943M60000A P5943M60000A...
  • Page 44 3. Continue until the top Tread 4 is installed. 4. Repeat the above for another pair of legs. FIG. 3 5. Insert the Ladder Handrails 3 into the top of the legs. Now step back and check if all the ladder treads are level (parallel to the ground). If not, lift the handrails, repeat the above for fixing that tread, and reinstall the handrails.
  • Page 45: Maintenance

    OWNER′S MANUAL 6. Secure the handrails: insert a Machine Screw 7 (with Washer 8) from the inside of the ladder, and fasten with a Lock Washer 9 and lastly a Cap Nut . Repeat with another handrail. The ladder should now look like an inverted “V” from the side. IMPORTANT: make sure that all the screws are firmly tightened.
  • Page 47 Nuestro representante del servicio de atención al cliente le ayudará a resolver el problema. Puede ser necesario que nos envíe parte del producto o el producto en su totalidad para inspección y/o reparación. No devuelva ningún producto a Polygroup sin un número...
  • Page 48 ÍNDICE Advertencias ..............................3 ~ 5 Lista de piezas ..............................6 ~ 7 Instrucciones de montaje ..........................7 ~ 9 Mantenimiento ..............................9 Si tuviera algún problema, llame al Servicio al cliente al número (888) 919-0070 de 8:00 a 17:00 (MST) Lun, Jue, Vie.
  • Page 49: Advertencias

    MANUAL DEL USUARIO INSTRUCCIONES IMPORTANTES DE SEGURIDAD Al instalar y usar este equipo electrónico, deben seguirse siempre ciertas instrucciones básicas de seguridad, incluidas las siguientes: LEA Y SIGA TODAS LAS INSTRUCCIONES Consérvelas para futuras consultas. El incumplimiento de estas advertencias e instrucciones puede provocar lesiones graves o la muerte de los usuarios, especialmente los niños. ADVERTENCIA PELIGRO ADVERTENCIA...
  • Page 50 9. Mantenga la piscina limpia. La parte más profunda de la piscina debe ser visible en todo momento desde la valla exterior de la piscina. 10. La piscina debe estar situada a una distancia mínima de 1,83 m de cualquier toma de corriente, y todas las tomas de 125 V 15-20 A situadas en un radio de 0,6 m de la piscina deben protegerse con un interruptor diferencial (GFCI), donde las distancias sean, por medida, la ruta más corta que seguiría el cable de alimentación de un aparato conectado al receptáculo, sin penetrar un suelo, pared, techo, marco con puerta abisagrada o corredera, apertura de una ventana o cualquier otra barrera permanente eficaz, hasta la pared interior de la piscina.
  • Page 51: Responsabilidades Del Instalador

    MANUAL DEL USUARIO Existen programas educativos y materiales Sobre los programas educativos (es decir, seminarios, talleres, folletos, vídeos, guías) del APSP, otros grupos de seguridad acuática y empresas privadas. Con el objetivo de comunicar información de seguridad útil a los dueños/operadores y usuarios de piscinas, está permitido que los miembros de la industria suministren esta información a los dueños/operadores y que soliciten o exijan a los dueños/operadores una declaración firmada de que han recibido, leído y seguirán las instrucciones.
  • Page 52: Lista De Piezas

    LISTA DE PIEZAS • ESTA ESCALERA ESTÁ DISEÑADA Y FABRICADA PARA LA ALTURA ESPECÍFICA DE LA PARED DE LA PISCINA. • RETIRE Y ASEGURE LA ESCALERA CUANDO LA PISCINA ESTÉ VACÍA. • VERIFIQUE LOS CÓDIGOS DE COLOR INDICADOS EN LOS SOPORTES DE ADVERTENCIA DE LA ESCALERA PARA PEDIR PIEZAS DE REPUESTO.
  • Page 53: Instrucciones De Montaje

    MANUAL DEL USUARIO 36” Pool 42” Pool 48” Pool 52” Pool Wall Height Wall Height Wall Height Wall Height Description Color Code Part # Qty. Part # Qty. Part # Qty. Part # Qty. Color A P5943M60000A P5943M60000A P5943M60000A P5943M60000A Color B P5943M60000A P5943M60000A...
  • Page 54 3. Continúe hasta que haya instalado el escalón superior 4. 4. Repita el procedimiento anterior con otro par de patas. FIG. 3 5. Inserte los mango de la escalera 3 en la parte superior de las patas. Ahora, de un paso atrás y observe si los escalones de la escalera están nivelados (paralelos al suelo).
  • Page 55: Mantenimiento

    MANUAL DEL USUARIO 6. Fijación de los pasamanos: Inserte un tornillo de máquina 7 (con la arandela 8) desde la parte interna de la escalera y apriételo con una arandela de cierre 9 y, por último, una tuerca de tapón .
  • Page 56 Customer Service Representative can assist you in resolving the problem. You may be asked to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup without a Return Merchandise Authorization number.
  • Page 57 3. Scoop out leaves and other debris from the pool. Spring Latch IMPORTANT NOTE: For vacuuming with other Polygroup Filter Pump Systems; Models: CP2000-C, RP, RX and Sand Filtration Systems; Please follow the ® directions on page 4 of this manual.
  • Page 58 Replace with a new cartridge if necessary. Repeat the process until the pool is thoroughly cleaned. IMPORTANT NOTE: For vacuuming with other Polygroup Filter Pump Systems; Models: CP2000-C, RP, RX and Sand Filtration Systems; Please follow the ®...
  • Page 59 OWNER′S MANUAL To Vacuum With A 5/8” Garden Hose (Not Included) 1. Extend the telescopic pole to its fullest length. 2. Attach the vacuum head to the open end of the telescopic pole. 3. Attach the vacuum bag to the vacuum head, tighten the drawing string and tie a simple shoelace knot.
  • Page 60 Representante de Servicio al Cliente pueda asistirle con resolver el problema. Puede ser necesario que nos envíe parte del producto o el producto en su totalidad para inspección y/o reparación. No devuelva ningún producto a Polygroup sin un número...
  • Page 61: Instrucciones De Funcionamiento

    3. Retire las hojas y los residuos de la piscina. Pasador elástico NOTA IMPORTANTE: Para aspirar con otros sistemas de Polygroup; Modelos: CP2000-C, RP, RX y Sistema de Filtración de Arena; Por favor siga las instrucciones en página 4 de este manual. Aspirando con la Bomba Polygroup Summer Waves Skimmer para modelos SFX Solamente.
  • Page 62 Apague la bomba, retire el cartucho de filtro y cepille/enjuague bajo agua corriente. Cambie el cartucho sies necesario. Repita el proceso hasta que la piscina esté totalmente limpia. NOTA IMPORTANTE: Para aspirar con otros sistemas de Polygroup; Modelos: CP2000-C, RP, RX y Sistema de Filtración de Arena; Por favor siga las instrucciones en página 4 de este manual.
  • Page 63 MANUAL DEL USUARIO Para aspirar con una manguera de jardín de 5/8" (no incluida) 1. Extienda la barra telescópica a la longitud máxima. 2. Encaje el cabezal de la aspiradora a la punta abierta del tubo tetelescópico. 3. Enganche la bolsa al cabezal la aspiradora, apriete la cuerda para cerrar y ate con un nudo sencillo.