Base Server Standard Capabilities And Features - Cisco N20-B6625-1 Spec Sheet

BASE SERVER STANDARD CAPABILITIES and FEATURES

Table 1 lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in CONFIGURING the SERVER on page
Table 1 Capabilities and Features
Capability/Feature
Chassis
CPU
Chipset
Memory
Expansion slots
Storage controller
Internal storage devices
Video
Interfaces
Power subsystem
Fans
Integrated management
processor
Cisco UCS B200 M2 Blade Server
Description
The B200 M2 Blade Server mounts in a Cisco UCS 5100-series chassis
Either 1 or 2 Intel® Xeon® 5500 or 5600 series processors
Intel® 5500 chipset
12 slots for registered DIMMs (up to 192 GB)
Accommodates one mezzanine adapter card
LSI Logic 1064e controller and integrated RAID (RAID 0 and 1 supported)
Up to two optional front-accessible, hot-pluggable 2.5-inch small form factor
(SFF) SAS or SATA solid-state disk (SSD) or hard disk (HDD) drives.
The server CIMC chip includes a Matrox G200 core. The first 8 MB of memory
are allocated to the video core.
1280 x 1024 resolution
■
32-bit color depth
■
8 MB video memory
■
Front panel
■
• One console connector (see
25)
Integrated in the Cisco UCS 5100 series chassis
Integrated in the Cisco UCS 5100 series chassis
The built-in Cisco Integrated Management Controller (CIMC) GUI or CLI
interface enables you to monitor the server inventory, health, and system
event logs.
BASE SERVER STANDARD CAPABILITIES and FEATURES
6.
ORDER OPTIONAL KVM CABLE on page
5