Day; Everyday - Hunter 44660 Owner's Manual

7 Day

7 day programming allows you to set all 7 days of the week individually.
To program your thermostat in this manner:
1. Press the button once to enter program mode and
program
2. Monday will be displayed at the top of your screen and your hour and am/pm indicator will flash.
are programming will be displayed at the bottom of the screen (heat or cool).
program 1. Remember, to change between am and pm, you must pass the 12th hour, unless in 24 hour time.
3. To move to minutes, press the
4. Press the button again to change to the temperature setting. The
program
program.
5. Use the button to change to your alternate system mode (heat or cool) and set the temperature for it using the
system
or buttons. You may also wait until you have one mode programmed and return later to program the other.
Note: The times for heating and cooling within each program period will always be the same.
6. At this time, you can use the " sensor" or
program if you choose to change them.
7. Once you have finished with program 1, press
for program 2 and your system mode will be displayed at the bottom of the screen. Follow the same process throughout all
4 programs.
Once all 4 programs for Monday have been programmed, press
displayed at the top of your screen. The same process as before will allow you to set all 4 programs for Tuesday and all other
days of the week and weekend.
Remember:
• The button will change between hour, minutes, set temperature, and programs 1-4.
program
• The and buttons will actually change the hour, minutes, and set temperature.
• " sensor" will change the reporting location for the temperature and
• Once complete, press
ret/clear
You may review your programs by using the
change each day.
Note: When reviewing your programs, ignore the programs under weekday and everyday. These programs will not affect 7 day
programming and can be ignored.
Once you are satisfied with your settings, press the
mode. Once you are finished, if you wish to activate auto season changeover, use the

Everyday

Everyday programming allows you to set all 7 days of the week at the same time.
To program your thermostat in this manner:
1. Press the button once to enter program mode and
program
at the top of your screen and your hour and am/pm indicator will flash. The system mode you are programming will be
displayed at the bottom of the screen (heat or cool).
2. Use the or to set the starting hour of program 1. Remember, to change between am and pm, you must pass the
12th hour, unless in 24 hour time.
3. To move to minutes, press the
4. Press the button again to change to the temperature setting. The
program
program.
5. Use the button to change to your alternate system mode (heat or cool) and set the temperature for it using the
system
or buttons. You may also wait until you have one mode programmed and return later to program the other.
Note: The times for heating and cooling within each program period will always be the same.
6. At this time, you can use the " sensor" or
program if you choose to change them.
7. Once you have finished with program 1, press
for program 2 and your system mode will be displayed at the bottom of the screen. Follow the same process throughout all 4
programs.
2 . Programming (Cont.)
prog/day
button again. or
program
button to change the temperature reporting
fan
to change to program 2. The hour and am/pm indicator will be flashing
program
to return to the main screen or wait 15 seconds.
button to move through the programs for each day.
program
key to change heat or cool to the alternate mode and program that
system
prog/day
button again. or
program
button to change the temperature reporting location or fan setting for this
fan
to change to program 2. The hour and am/pm indicator will be flashing
program
44008-01 • 02/10/10 • Hunter Fan Company
twice for 7 day programming.
Use the
will adjust the minutes in increments of 10.
and will adjust the temperature for that
to change to program 1 for Tuesday, which will be
prog/day
will change the fan between auto and on.
fan
system
9 times for everyday programming. Everyday will be displayed
will adjust the minutes in increments of 10.
and will adjust the temperature for that
7 7
The system mode you
or to set the starting hour of
location or fan setting for this
will allow you to
prog/day
button to change to "auto" mode.