Canon PIXMA MX870 Setting Manual

Connecting The Phone Lines

• Plug the provided phone cord into the wall jack
  
• Plug the provided phone cord into the "L" jack located on the rear of the multifunction
  
• Remove the white plug from the upper jack.
  
• Plug the second phone cord into the jack marked with an image of a "telephone" located on the rear of the multifunction.
  
• Plug the second phone cord into the phone
  

Setting Up The Receive Mode

1. Turn on the MX870 by pressing the ON button.
   
2. Press the FAX button.
   
3. The fax standby screen will appear.
   
4. Press the center FUNCTION button.
   
5. The Receive mode settings screen will appear.
   
6. Use the UP or DOWN button to select "TEL priority mode".
   
7. Ensure that "TEL priority mode" is highlighted.
   
8. Press the OK button.
   
9. Your MX870 is now set to Tel priority mode. Notice that the mode is listed on the fax standby screen.
   

Receiving A Fax

To receive a fax:

• Pick up the handset on the phone connected to the MX870.
• Listen for fax tones.
• When the tones stop hang up the handset.
• The MX870 will receive the fax document.

In order to receive a fax, you must pick up the handset on a phone that is connected to the multifunction.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Canon PIXMA MX870 Setting Manual