HIKVISION TurboHD H0T Series User Manual
HIKVISION TurboHD H0T Series User Manual

HIKVISION TurboHD H0T Series User Manual

Bullet and turret camera
Hide thumbs Also See for TurboHD H0T Series:

Advertisement

Quick Links

Bullet and Turret Camera
Thank you for purchasing our product. If there are
any questions or requests, do not hesitate to contact
the dealer.
This manual applies to the models below:
Type
Type I Camera
Type II Camera
Hikvision USA Inc., 18639 Railroad St., City of Industry,
CA 91748, USA • Hikvision Canada, 4848 rue Levy,
Saint Laurent, Quebec, Canada, H4R 2P1
Telephone: +1-909-895-0400 • Toll Free in USA:
+1-866-200-6690 • E-Mail:
www.hikvision.com
COPYRIGHT ©2017-2018 Hangzhou Hikvision Digital
Technology Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others,
wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its
subsidiaries (hereinafter referred to be "Hikvision").
This user manual (hereinafter referred to be "the
Manual") cannot be reproduced, changed, translated,
or distributed, partially or wholly, by any means,
without the prior written permission of Hikvision.
Unless otherwise stipulated, Hikvision does not make
any warranties, guarantees or representations,
express or implied, regarding to the Manual.
This manual may contain technical or printing errors,
and the content is subject to change without notice.
Updates will be added to new versions of this manual.
We will readily improve or update the products or
procedures described in the manual.
UM DS-2CEx6H0T-xIT3ZF 042318NA
• DS-2CE16H0T-AIT3ZF
• DS-2CEAH0T-IT3ZF
User Manual
Model
DS-2CE16H0T-AIT3ZF
DS-2CE56H0T-IT3ZF
sales.usa@hikvision.com
https://manual-hub.com/
TurboHD
H0T Series
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TurboHD H0T Series and is the answer not in the manual?

Questions and answers

Summary of Contents for HIKVISION TurboHD H0T Series

  • Page 1 Type I Camera DS-2CE16H0T-AIT3ZF Type II Camera DS-2CE56H0T-IT3ZF Hikvision USA Inc., 18639 Railroad St., City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, Saint Laurent, Quebec, Canada, H4R 2P1 Telephone: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.usa@hikvision.com...
  • Page 2: Regulatory Information

    1 Preface 1.1 Regulatory Information 1.1.1 FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 3 1.1.4 Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. 1.1.5 Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions.”...
  • Page 4: Product Features

    Do not place the camera in extremely hot, cold (the • operating temperature shall be -40° to 60° C), dusty or damp locations, and do not expose it to high electromagnetic radiation. If cleaning is necessary, use a clean cloth with a bit •...
  • Page 5: Installation

    Note: To switch the video output, press and hold the switch button until the image turns black, then release. Cycle through available types to return to the default HD-TVI output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS. 2.2.2 Overview of Type II Camera Figure 2 Overview of Type II Camera...
  • Page 6 Steps: 1. Paste the drill template (supplied) to the place where you want to install the camera. 2. Drill the screw holes and the cable hole (optional) in the ceiling according to the drill template. Figure 3 Drill Template Note: Drill the cable hole when using ceiling outlet to route the cable.
  • Page 7 1) Loosen the No. adjusting screw to adjust ① the pan position [0° to 360°]. Tighten the No. adjusting screw. ① 2) Loosen the No. adjusting screw to adjust ② the tilting position [0° to 90°]. Tighten the No. adjusting screw. ②...
  • Page 8 Figure 7 Fix the Camera to the Ceiling 7. Route the cables through the cable hole or the side opening of the junction box. 8. Combine the junction box cover with its body. Figure 8 Fix the Junction Box Cover Back to its Body 9.
  • Page 9 Figure 10 Remove the Clip Plate 4. Fix the mounting base to the ceiling with supplied screws. Figure 11 Fix the Mounting Base on the Ceiling Note: The supplied screw package contains self-tapping screws and expansion bolts. For a cement wall, expansion bolts are required to fix the camera.
  • Page 10 Figure 13 3-axis Adjustment 1). Hold camera body and rotate enclosure to adjust the pan position [0° to 360°]. 2). Move the camera body up and down to adjust the tilt position [0° to 75°]. 3). Rotate the camera body to adjust the rotation position [0°...
  • Page 11: Menu Description

    Figure 15 Secure Screws on Junction Box’s Cover 6. Secure the junction box’s body on the ceiling with four PA4 × 25 screws. Figure 16 Secure the Junction Box’s Body on Ceiling 7. Combine the junction box cover with its body by tightening four screws on junction box’s cover.
  • Page 12: Video Format

    Figure 19 Main Menu Overview 5. Click the direction arrow to control the camera. 1). Click up/down direction button to select the item. 2). Click Iris + to confirm the selection. 3). Click left/right direction button to adjust the value of the selected item. 4.1 VIDEO FORMAT You can set the video format to 5 MP @ 20 fps, 4 MP @ 25 fps, 4 MP @ 30 fps, 2 MP @ 25 fps, or 2 MP @...
  • Page 13: Exposure Mode

    Figure 20 EXPOSURE 4.3 EXPOSURE MODE You can set the EXPOSURE MODE as GLOBAL, BLC, and DWDR. • GLOBAL Normal exposure mode, which sets exposure according to the whole image brightness. • BLC (Backlight Compensation) BLC (Backlight Compensation) compensates light for the front object to make it clear, but may cause the overexposure of the background, where the light is strong.
  • Page 14 Figure 21 B&W • IR LIGHT You can turn on/off the IR LIGHT to meet the requirements of different circumstances. • SMART IR The Smart IR function is used to adjust the light to its most suitable intensity, and prevent the image from over exposure.
  • Page 15: Video Settings

    • N    D Threshold (Night to Day Threshold) Night to Day Threshold is used to control the sensitivity of switching the night mode to the day mode. You can set the value from 1 to 9. The larger the value, the more sensitive the camera.
  • Page 16: Factory Default

    4.7.2 BRIGHTNESS Brightness refers to the brightness of the image. You can set the brightness value from 1 to 9 to darken or brighten the image. The higher the value, the brighter the image. 4.7.3 CONTRAST This feature enhances the difference in color and light between parts of an image.

This manual is also suitable for:

Turbohd ds-2ce16h0t-ait3zfTurbohd ds-2ceah0t-it3zf

Table of Contents