Setting System And Fan - Honeywell 32207484 Owner's Manual

DELUXE PROGRAMMABLE THERMOSTAT
5. Press Heat/Cool Settings to change between heat and cool settings.
6. Press increase
(Example: Cool 84° = cooling equipment will operate when the room tempera-
ture is above 84°F)
NOTE: In this example, the thermostat uses the Hold setting for eighteen days
and returns to the daily programs at the Return period start time. The
temperature settings are heating 54°F and cooling 84°F. Only the heat-
ing temperature is used because the System is set for Heat. The ther-
mostat will use both the heating and cooling temperature settings when
the System is set to Auto.
IMPORTANT
If the Hold needs to be cancelled before the designated time, press Run Pro-
gram to return to the program.

Setting System and Fan

The system default setting is Heat and the fan default setting is Auto. Use the System
and Fan keys to change the settings. The fan settings can be set for each program
period individually. The system selection is for all the program periods.
System settings control the thermostat operation as follows:
Heat: The thermostat controls the heating.
Off: Both the heating and cooling are off.
Cool: The thermostat controls the cooling.
Auto: The thermostat automatically changes between heating and cooling opera-
tion, depending on the indoor temperature (select models).
Fan settings control the system fan as follows:
On: Fan operates continuously.
Auto: Fan operates with equipment.
69-1400—1
s
or decrease
Time
Run Set Current
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
t
key to adjust the temperature setting, if desired.
Set Program
Leave
Return Sleep
System Fan
M14625
12
System
Fan