Setting System And Fan - Honeywell Deluxe User Manual

IMPORTANT
If the Hold needs to be cancelled before the designated
time, press Run Program to return to the program.

Setting System and Fan

The system default setting is Heat and the fan default setting is
Auto. Use the System and Fan keys to change the settings. The
fan settings can be set for each program period individually.
The system selection is for all the program periods.
System settings control the thermostat operation as follows:
Heat: The thermostat controls the heating.
Off: Both the heating and cooling are off.
Cool: The thermostat controls the cooling.
Auto: The thermostat automatically changes between
heating and cooling operation, depending on the indoor
temperature (select models).
Fan settings control the system fan as follows:
On: Fan operates continuously.
Auto: Fan operates with equipment.
Run
Program
Hold Temp
Setting Temporary Fan Operation
If your thermostat has a Fan key and this feature, press Fan
until the desired fan operation is selected. This fan setting will
be in effect until the next regularly scheduled period starts.
Time
Set Current
Wake
Day/Time
Heat/Cool
Day
Settings
Daylight
Copy
Time
Set Program
Leave Sleep
Return
System Fan
M14625
16
System
Fan
69-1400–1