Honeywell 32207484 Owner's Manual page 13

Setting Temporary Fan Operation
If your thermostat has a Fan key and this feature, press Fan until the desired fan
operation is selected. This fan setting will be in effect until the next regularly scheduled
period starts.
Viewing and Resetting Timer Settings
When the thermostat activates a timer, the thermostat flashes Filter until the timer
resets.
1. Reset the timer by pressing the
Filter
2. Press the Time
Filter
3. Press the Run Program key.
NOTE: You can view the number of days remaining at anytime by pressing the
timers show sequentially when pressing the
Using Daylight Savings Time Feature
This feature allows you to change in and out of Daylight Savings Time with a key
press. When pressed in the fall, the time will go back one hour. In the spring, the time
will go ahead one hour and the display will show DST. See Setting the Current Day
and Time section for initial setting instructions.
NOTE: Pressing Daylight Time more than once within a five minute period will scroll
you through various time options (Example: one hour earlier or later with or
without DST). Pressing Daylight Time six times in a five minute period will
return you to your original setting.
s
key to reset the timer.
key three or four times. If more than one timer is active, all active
Daylight
Time
Run Set Current
Program Day/Time
Time
Hold Temp Day
Daylight
Copy
Time
DELUXE PROGRAMMABLE THERMOSTAT
key until the expired timer is displayed.
Days
Days
Set Program
Wake Leave Return Sleep
Tue
Heat/Cool
System Fan
Settings
Wake
13
M20243
M20244
key several times.
System
Em Heat
AM
Fan
Room
DST Auto
M14659
69-1400—1