Programming The First Day - Honeywell 32207484 Owner's Manual

DELUXE PROGRAMMABLE THERMOSTAT

Programming the First Day

Start by programming the Wake time and temperature (and fan operation on select
models) for any one day:
1. Press Wake.
2. Press Day until the desired day is displayed.
Day
3. Press Time
NOTE: The program times are in fifteen minute intervals.
(Example: 8:00, 8:15, 8:30).
4. Press increase
played.
NOTE: The setpoint temperature range is 40 to 90°F (7 to 31°C) for heating
and 45 to 99°F (9 to 37°C) for cooling.
NOTE: Press Fan to modify fan operation. Auto means the fan will run only
when the heating or cooling equipment is operating. On means the fan
will run continuously for the entire period.
69-1400—1
Time
Set Current
Run
Program Day/Time
Wake
Heat/Cool
Hold Temp
Day
Daylight
Copy
Time
Time
Run Set Current
Program Day/Time
Hold Temp Day
Daylight
Copy
Time
s t
or Time until the desired Wake time is displayed.
Time
Time
Run Set Current
Program Day/Time
Hold Temp Day
Daylight
Copy
Time
s
or decrease
Time
Run Set Current
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
Set Program
Set Program
Wake Leave Return Sleep
Tue
System Fan
Settings
Wake
Set Program
Set Program
Wake Leave Return Sleep
Mon
Heat/Cool
System Fan
Settings
Wake
Set Program
Set Program
Wake Leave Return Sleep
Mon
Heat/Cool
System Fan
Settings
Wake
t
key until the desired Wake temperature is dis-
Set Program
Set Program
Leave Return Sleep
Mon
System Fan
Wake
6
System
Setting
Heat
AM
Fan
Heat
Auto
M14635
System
Setting
Heat
AM
Fan
Heat
Auto
M14636
System
Setting
Heat
AM
Fan
Heat
Auto
M14637
System
Setting
Heat
AM
Fan
Heat
Auto
M14638