Honeywell 32207484 Owner's Manual page 14

DELUXE PROGRAMMABLE THERMOSTAT
Displaying the Outdoor Temperature
If your thermostat is equipped with an outdoor sensor, you can check the temperature
at the sensor by pressing
Replacing the Batteries (select models)
• Install the batteries in the wallplate so the positive terminals all point up (see
illustration).
• If the thermostat is already mounted on the wall, remove the thermostat by placing
your thumb between the thermostat and wallplate and pulling the thermostat up and
away as shown.
When the batteries are running low, a REPL BAT message flashes for one to two
months before the batteries run out completely. Replace the batteries as soon as
possible once the message flashes.
69-1400—1
once.
Time Set Program
Run Set Current
Wake Leave Return Sleep
Program Day/Time
Heat/Cool
Hold Temp Day System Fan
Settings
Daylight
Copy
Time
WALLPLATE
B
R RC O
INSTALL 3 AA ALKALINE BATTERIES
AS SHOWN, POSITIVE (+) TERMINALS
TOWARD TOP.
14
W Y G
M16424
Outdoor
M14660
M10622