Honeywell 32207484 Owner's Manual page 9

Clearing Program Period
NOTE: The thermostat must be in the program mode to use the clear feature. Go to
step 2 if the thermostat is already in the program mode.
1. Press Wake, Leave, Return or Sleep.
2. Press Day until the desired day is displayed.
3. Press Leave, Return or Sleep until the start time and temperature setting are
cleared (approximately 3 seconds)
NOTE: Wake cannot be cleared..
4. Repeat steps 2 and 3 for all the periods to be cleared.
5. Press Run Program.
Time
Set Current
Run
Leave
Program Day/Time
Hold Temp
Day
Daylight
Copy
Time
Time
Run Set Current
Day Program Day/Time
Hold Temp Day
Daylight
Copy
Time
Time
Run Set Current
Leave
Day/Time
Program
Hold Temp Day
Daylight
Copy
Time
DELUXE PROGRAMMABLE THERMOSTAT
Set Program
Set Program
Wake Leave Return Sleep
Mon
Heat/Cool
System Fan
Settings
Leave
Set Program
Set Program
Wake Leave Return Sleep
Heat/Cool
System Fan
Settings
Leave
Set Program
Set Program
Wake Leave Return Sleep
Heat/Cool
System Fan
Settings
Leave
9
System
Setting
Heat
AM
Fan
On
Heat
M14647
System
Setting
Heat
AM
Fan
Sat
On
Heat
M14648
Setting
Sat
Heat
M14649
69-1400—1