Kenmore 83142 Operating Instructions

Before Operating Your Dryer
Read your dryer Use and Care Guide.
important safety and warranty information. It also has
many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Use and Care
Guide before operating this appliance.
Operating Steps
Read in your Use and Care
Drying Procedures
Guide. It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
If desired, add a dryer fabric
3. Load the dryer.
softener sheet.
4. Close the dryer door.
5. Set Temperature and Wrinkle-Rid/Signal
controls as desired.
Printed in U.S.A.
OPERATING INSTRUCTIONS
6. Turn cycle selector clockwise to desired setting.
It has
Turn the Turn to Start control
7. Start dryer.
clockwise to ON.
release.
8. When Signal Option control is on, a signal will
sound near the end of the cycle.
Wrinkle-Rid/Signal option is selected, a signal will
sound every 5 minutes as a reminder to remove
the load during
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
the Air Fluff-No Heat cycle only.
Hold for 1-2 seconds and
When
WRINKLE RID.
83142/93142
Select the temperature most suitable for each load.
The
REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
,
HEAT KNITS-MEDIUM-LOW HEAT,
temperature settings may be used with any
LOW HEAT
cycle setting.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
The Automatic Dry and Timed Dry cycles end with a
cool down period. The heat automatically turns off
and the load continues to tumble during the cool
down period. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying time.
P/N 134187400 (0210)
and
DELICATES-