Chevrolet TAHOE - TRUCK NAVIGATION SYSTEM 2010 Owner's Manual page 85

Helpful Hints for Stating
Commands
•
When a multiple command is
available, choose the command
that best works for you.
•
Words that are in brackets are
optional. For example, for the
command Radio [band] [select]
FM, stating Radio FM or
Radio select FM are both valid
commands.
•
When the system recognizes the
command the system will:
− either perform the function
− ask you to confirm your choice
by clearly stating "yes or no"
− issue an error message such
as "System does not
recognize this command" or
direct you to "Please start
speaking after the beep"
•
If the system is not yet ready, the
system may state "System is
checking the disc. Please wait.".
•
To cancel a command or if
the system response does
not match your verbal command,
press and hold the talk symbol
button. The system will reply,
"System will cancel the
voice recognition".
•
If you experience difficulty with
the system recognizing a
command, try saying it more
softly, and wait for a few seconds
after the beep, or you may just
try saying it again.
•
Background noise may cause
voice commands to be
misunderstood, including airflow
noise from wind.
•
To use the voice recognition
system, the map DVD must
be loaded.
Infotainment System
This system is able to recognize
commands in three different
languages. The system will only
recognize commands based on
the language selected from the
Driver Information Center (DIC).
See "Driver Information Center,
DIC Vehicle Personalization" in the
Index of your vehicles owner manual.
Voice Recognition Commands
The following list shows all of the
voice commands available for
the navigation system with a brief
description of each. The commands
are listed with the optional words
in brackets. To use the voice
commands, refer to the instructions
listed previously.
85