Chevrolet TAHOE - TRUCK NAVIGATION SYSTEM 2010 Owner's Manual page 70

70 Infotainment System
To enter a destination by entering
the city name first, do the following:
1. Press the DEST hard key.
6
2. Select the Address Entry
screen button.
3. Select the City name button.
4. Enter the city name or touch the
Last 5 Cities screen button.
The Last 5 Cities screen
will display a list of the last
five city names that had been
entered. Select a city from the
list and it will appear in the
City name area.
If using the alpha keyboard,
finish entering the city name.
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents
the number of available cities.
Select this button to view the list
and select a city.
5. Once a city has been selected
the Street name category will
automatically be selected
for entry.
Start entering the street name.
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button
with a number in it, it represents
the number of available streets.
Select this button to view
the list.
6. Select the street name with the
correct prefix (Dr., Ln, St., etc.)
from the list.
7. Once a street has been selected,
the numeric keyboard will
display, allowing you to enter the
house number. The system
will display the house number
range that is available for
the street.
8. Select the Go screen button.
The map screen, with the
destination marked, will display.
9. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate
and highlight the route.
10. Select the Start Guidance
screen button. You are now
ready to start your route.
See "Getting Started on Your
Route" later in this section
for more information.