Canceling Guidance - Chevrolet TAHOE - TRUCK NAVIGATION SYSTEM 2010 Owner's Manual

8. Select the Name screen button.
An alpha-keyboard will display.
Enter the name.
9. Press and hold one of the
screen buttons at the bottom of
the screen until a pop-up
confirmation displays.
The name will appear in that
preset destination screen button
and is now available to select
from the Destination Entry
screen. See "Using Your Stored
Preset Destinations" next in
this section to select it as a
destination.
See "Adding or Changing Preset
Destinations" under Destination
on page 68 for more information
on how to add preset
destinations.
Using Your Stored Preset
Destinations
These destinations are available for
selection while driving.
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the O (power) knob to
turn the system on.
3. Insert the DVD map disc. See
"Installing the Map DVD" under
Maps on page 47 for more
information.
4. A caution may appear. Touch the
OK screen button to proceed.
5. Press the DEST hard key.
6. Select one of the available
preset destination screen
buttons. A map screen, with the
destination marked, will appear.
Infotainment System
7. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate
and highlight the route.
8. Select the Start Guidance screen
button. You are now ready to
start your route.
See "Preset Destination" under
Destination on page 68 for more
information.

Canceling Guidance

Guidance will be canceled once
you arrive at your final destination.
To cancel guidance prior to arrival
at the final destination, do the
following:
1. Press the DEST hard key.
2. Press the Cancel Guidance
screen button.
13