Chevrolet TAHOE - TRUCK NAVIGATION SYSTEM 2010 Owner's Manual page 23

Finding a Station
For information on finding and
changing a station, see AM-FM
Radio on page 14 earlier in
this section.
AM/FM/XM: Touch the source
(AM, FM, or XM, if equipped) screen
button or press the AUDIO key
repeatedly until the desired source
is highlighted. See AM-FM Radio
on page 14 earlier in this section.
Category: Touch the screen button,
located in the middle of the screen,
to receive a list of all of the
selected band stations in the area.
Use the up and down arrow
screen buttons to scroll the
frequencies. Touch the desired
frequency.
XM lists will also contain a category
to select and the stations or
channels that pertain to the
category. For XM, touch the left and
right arrow screen buttons to
change categories. The station
information will appear on the
display. See "Radio Menu" later in
this section to add and remove
XM categories from the category list.
When listening to XM stations,
you will be able to select all of the
categories when using the right
and left arrow screen buttons on the
main audio screen. The categories,
when removed, will not be
enabled to select from the category
list screen.
$
Refresh List: Touch this screen
button to refresh the list of stations.
When viewing a map screen, the
name of the station or channel will
appear on the display.
Infotainment System
¨ ©
SEEK / SEEK: To seek
stations, press the left or right arrow
keys to go to the next or previous
station and stay there.
To scan stations, press and
hold either arrow for more than
two seconds. The radio will go to a
station, play for a few seconds,
then go on to the next station.
To stop scanning, press either
arrow again.
Storing Radio Station Presets
This feature allows you to store
up to 30 preset stations. You can
mix AM, FM, and XM (if equipped).
To store presets, see AM-FM
Radio on page 14 earlier in this
section.
23