Chevrolet TAHOE - TRUCK NAVIGATION SYSTEM 2010 Owner's Manual page 72

72 Infotainment System
To enter a destination by entering a
cross street, do the following:
1. Press the DEST hard key.
6
2. Select the Address Entry
screen button.
3. Select the Street screen
button and start entering
the street name.
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents
the number of available streets.
Select this button to view
the list.
4. Select the desired street name
with the correct prefix from the
list (Dr., Ln., St., etc.).
5. Once a street has been selected
the Cross Street screen button
will become available. Select the
Cross Street button and start
entering the cross street name.
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents
the number of available cross
streets. Select this button to view
the list.
6. Select the street name with the
correct prefix from the list
(Dr., Ln., St., etc.). An Information
screen will automatically display.
7. Select the Go screen button.
The map screen, with the
destination marked, will display.
8. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate
and highlight the route.
9. Select the Start Guidance screen
button. You are now ready to
start your route.
See "Getting Started on Your
Route" later in this section
for more information.
Point of Interest (POI)
The Point of Interest (POI)
destination entry method allows you
to select a destination from the
POI list.
i
Point of Interest: Touch this
screen button to access the Point of
Interest (POI) screen. From this
screen you have two options
to select/enter a destination; enter
the name using the alpha keyboard
or select a category from the
category list.