Chevrolet CRUZE NAVIGATION SYSTEM - 2011 Owner's Manual page 80

80 Infotainment System
Navigation (help): The system
plays back helpful advice about
navigation commands, and some
common navigation commands
which are available.
Voice Recognition Commands
The following list shows the voice
commands available for the
navigation system with a brief
description of each. The commands
are listed with the optional words in
brackets. To use the voice
commands, see the instruction
listed previously.
Display Commands
Display (set) day (mode), display
(select) day (mode): This
command instructs the system to
switch the display to day mode.
Display (set) night (mode),
display (select) night (mode):
This command instructs the system
to switch the display to night mode.
Display (set) auto (mode), display
(select) auto (mode): This
command instructs the system to
switch the display to auto mode.
Display (help): This command
instructs the system to play back
helpful advice about display
commands, and some common
display commands which are
available to adjust the display
setting.
Radio Commands
Radio AM, radio (band) AM, radio
FM, radio (band) FM, radio XM,
radio (band) XM: These
commands instruct the system to go
to either the AM, FM, or XM radio
bands.
Radio select (frequency) AM,
radio select (frequency) FM:
These commands instruct the
system to go to a specific frequency
on either the AM or FM band. For
example, radio select ninety seven
point one FM or radio select
ten forty AM.
Radio select (channel) XM: This
command instructs the system to go
to a specific channel on the XM
band (if equipped). For example,
radio select one fifty one XM.
Radio (help): This command
instructs the system to play back
some helpful advice about radio
commands, and some common
radio commands which are available
to the user.
CD/DVD/Disc Commands
The following commands are only
available when a CD, MP3, or DVD
is loaded.
Radio CD, radio DVD, radio
Disc: These commands instruct the
system to go to Disc mode.
Radio CD select (track number),
radio DVD select (track number),
radio disc select (track number):
These commands instruct the
system to play a specific track on
the Disc. For example, radio disc
select ten. This command supports
up to 254 tracks.