Chevrolet CRUZE NAVIGATION SYSTEM - 2011 Owner's Manual page 57

To add a waypoint:
1. Press the DEST button.
2. Use the MENU or MENU/SEL
knob to select Add Waypoint.
This button is only available if
the route has been calculated.
3. Enter the waypoint by any of the
add destination methods. See
information. The system
calculates and highlights the
route and the route can be
started.
4. To add more waypoints, press
the DEST button. Use the MENU
or MENU/SEL knob to select the
Add preset button to add the
waypoint in the order desired on
the route. The system calculates
and highlights the route and the
route can be started.
To delete a waypoint:
1. Press the DEST button.
2. Select the Delete Waypoint
preset button.
3. Use the MENU or MENU/SEL
knob to select the waypoint to be
deleted.
4. A confirmation message
or more
displays. Press the MENU or
MENU/SEL knob to select Yes to
delete the waypoint; select No to
cancel this operation. The
system calculates and highlights
the route and the route can be
started.
Route Preview
To preview the entire route in either
direction, press the appropriate
preset button to navigate the
screen.
Infotainment System
(Reverse or Forward Skip):
1. Select the reverse skip arrow to
go to the start point.
2. Select the forward skip arrow to
go to the final destination.
57