Chevrolet CRUZE NAVIGATION SYSTEM - 2011 Owner's Manual page 27

To record selected tracks from
the disc:
1. Load a CD or press the DVD/
HDD/AUX button until the disc
screen displays.
2. Press Seek up and Seek down
or CD/Disc Music Menu to select
a song for recording.
3. Press the REC button.
4. A confirmation displays.
5. Select the song name to record.
A progress bar displays.
Recording from a USB Device
to the Hard Drive
To copy all tracks from the USB
device:
1. Connect a USB device or press
the DVD/HDD/AUX button until
the disc screen displays the
USB screen.
2. Press the REC button.
3. A confirmation displays.
4. Select All Songs to copy all
tracks. A progress bar displays.
To record selected tracks:
1. Connect a USB device.
2. Press the DVD/HDD/AUX button
until the disc screen displays the
USB screen.
3. Use the Seek up and Seek down
or USB Music Menu to select a
song for recording.
4. Press the REC button.
5. A confirmation displays.
6. Select the song name to record.
A progress bar displays.
Duplicate Content
When the record function is started,
there is a check to verify that it does
not already exist on the hard drive.
If the entire content of the CD exists
on the hard drive, it will not record
the content.
If it is determined that some or none
of the content exists, then only that
content will be copied to the hard
drive.
Infotainment System
If the same file is recorded from a
USB and CD, it is possible to have
duplicate tracks.
CD Eject
If the CD ejects before the recording
process completes, only tracks that
have been completely recorded are
stored to the hard drive; incomplete
tracks are discarded.
Power Mode
If the system is turned off during a
CD or USB recording process,
recording stops. When the radio is
turned back on, the recording
process does not resume
automatically.
27