Chevrolet CRUZE NAVIGATION SYSTEM - 2011 Owner's Manual page 16

Navigation system
Hide thumbs Also See for CRUZE NAVIGATION SYSTEM - 2011:
Table of Contents

Advertisement

16
Infotainment System
Mixed-Band Presets
Up to 36 preset stations can be
stored. Each page can store
six preset stations. The presets
within a page can be from different
radio bands.
To scroll through the pages, press
the FAV (favorites) button. The
current page number displays above
the preset buttons. The stored
stations for each list displays at the
bottom of the screen. The number of
preset FAV lists can be changed.
To store a radio station to a
mixed-band preset list:
1. Press the BAND button until the
desired band is selected.
2. Turn the MENU or MENU/SEL
knob to the station.
3. Press the FAV button to scroll
the list.
4. Press and hold one of the
preset buttons for more than
two seconds. The station
frequency appears on the preset
button at the bottom of the
display.
5. Repeat the steps for each preset
in each page.
To recall a preset station from a
FAV page:
1. Press the FAV button to scroll to
the page.
2. Press the preset button. The
stored preset station is recalled.
Automatic Store
The strongest stations in a radio
band can be searched and
automatically stored through the
Automatic Store feature. Press and
hold the AS button until an
autostore message displays. The
12 stations with the strongest signal
strength in the current radio band
will be stored.
Timeshift
The timeshift feature automatically
begins recording the audio when
listening to the radio.
The recording allows playback of
content that was missed.
Timeshift stores up to 20 minutes of
content. After 20 minutes, it
removes the oldest content and
continues recording new content.
While listening to the radio, press
the
button to stop hearing the
information through the speaker.
During this paused time, timeshift
keeps recording. A status bar
displays the length of the recording.
To resume listening to the broadcast
at the point left off, press the
button again.
Timeshift stops recording and
erases the buffer when the vehicle
is turned off or the station or source
is changed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents