Installing The Scanner Hardware - Plustek V1.4 User Manual

Note: OpticPro should function with a Standard Printer Port
(SPP) that supports bi-directional communication. However, if
you have an SPP port that is not bi-directional, it is highly likely
that the scanner will not be found. Also, bi-directional SPP
technology is much slower than EPP.
Installing the Scanner
If you have already installed your scanner, please skip this
section. The following section describes how to connect the
scanner to your computer and printer. Please carefully follow
along to ensure proper installation.
1. Turn OFF your computer, its related peripherals and
disconnect all related power cables!
2. Please take a moment to study Figure 1.
Rear of Computer
Host
1
Figure 1. Connecting the Scanner
4
3
Rear of Scanner
Printer
Hardware
Power
Adapter
Rear of Printer
2
Chapter I
3