Table of Contents
Advertisement
C
HAPTER
Before installing your scanner, please verify that you have all of the proper components.
A list of the package contents is provided in the "Box Contents" section of this guide.
S
I
OFTWARE
Your scanner comes with the scanner's driver and eConnector Utility Application,
calibration wizard, and scanner utility. All of these software applications use
approximately 800 megabytes of hard disk space after they are installed into your
computer. To ensure ample room for the installation, as well as for scanning and saving
images, a minimum of 2 GB of hard disk space is recommended.
Information
This USB scanner can only operate under the Microsoft Windows 7 / 8.1 / 10 operating
system.
H
R
ARDWARE
This scanner connects to your computer through the Universal Serial Bus (USB) which
supports HOT PLUG AND PLAY. To determine whether your computer is USB-capable,
you must check the rear of your PC to locate a USB jack that looks like the picture below.
If you are having trouble in locating the USB port on your computer, please refer to the
hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which usually
appear as shown below.
If you don't find such USB ports on your computer, then you need to purchase a certified
USB interface card to add USB capabilities to your computer.
I. I
NSTALLING THE
NSTALLATION
The availability of the bundled application programs
may vary depending on the scanner model you
purchase.
EQUIREMENTS
USB Connector(s)
R
EQUIREMENTS
8
S
CANNER
Advertisement
Table of Contents
