Page 3
● Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools. ● Make sure the monitor is placed on a at surface. lf the monitor falls down, it may cause human injury or device damage.
Product introduction Packing list ● Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor. ● The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
Installation Installation of base 1. Open the carton package, take out the upper and lower foam covers and put them at onthe table top. Upper foam covers Lower foam covers 2. Remove the upper styrofoam and the inner bag protection bag, and place the lower styrofoam on the desktop, and the machine should not leave the lower styrofoam.
Page 6
4. Press the quick release button to take out the rotary shaft component. Rotary shaft component Quick release button 5. Assemble the rotary shaft component to the bracket as shown in the gure and lock it with the accessory screws, Buckle the installed base back to its original position. (Pay attention to check: whether there is any looseness.) Screws x 2 6.
Page 7
Installation of mount 1. Open the carton package, take out the upper and lower foam covers and put them at onthe table top. Upper foam covers Lower foam covers 2. Remove the upper styrofoam and the inner bag protection bag, and place the lower styrofoam on the desktop, and the machine should not leave the lower styrofoam.
Page 8
4. Take out the wall mount adapter and tighten the locking screw. Mount adapter Mount Screws x 4 5. During padlocking of the monitor, do not pinch the screen with the hands to avoid damaging the screen. Install the mount to the mount stud by referring to the user manual of the mount (purchased separately).
Usage Description of buttons Button Function Menu button: Press to enter sub-menus/ quickly enter the main menu. Down button: Press to move down in the menu/quickly enter the game crosshair mode. Up button: Press to move up in the menu/quickly enter the contextual mode. Exit/hot key: Press to return to the previous menu/quickly switch the color format.
Cable connection *The bottom interface con guration at the back of the monitor varies with products. *Note: lf the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department. HDMI interface Use the HDMl cable to connect the HDMI Use the HDMI-DVl cable (not included) to...
OSD menu Menu description ● The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure. ● Specifications of the OSD menu may change with improvements of functions without prior notice.
Need help?
Do you have a question about the DGVIEW220 and is the answer not in the manual?
Questions and answers