Related Manuals for Elo Touch Solutions ET1515L
Summary of Contents for Elo Touch Solutions ET1515L
- Page 1 USER MANUAL Elo Touch Solutions ET1515L,ET1715L,ET1915L Touch monitors UM600623 Rev A User Manual: 1515L, 1715L, 1915L UM600623 Rev B, Page 1 of 26...
- Page 2 Elo Touch Solutions, Inc. Disclaimer The information in this document is subject to change without notice. Elo Touch Solutions, Inc., and its Affiliates (collectively "Elo") makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose.
-
Page 3: Table Of Contents
Table of Contents Chapter 1: Introduction ................4 Chapter 2: Installation ................5 Chapter 3: Mounting ................. 8 Chapter 4: Operation ................11 Chapter 5: Technical Support ..............15 Chapter 6: Safety & Maintenance ............18 Chapter 7: Regulatory Information ............20 Chapter 8: Warranty Information ............ -
Page 4: Chapter 1: Introduction
Chapter 1: Introduction Product Description Your new touchmonitor combines the reliable performance of Elo Touch Solutions touch products with the latest developments in touch technology and display design. This combination of features creates a natural flow of information between the user and the touch monitor. -
Page 5: Chapter 2: Installation
Chapter 2: Installation Unpacking the Touchmonitor Open the carton and verify that the following items are present: 1515L(E210772,E700813) 1515L(E399324,E344320) 1715L,1915L Touch monitor Touch monitor Touch monitor VGA cable VGA cable VGA cable USB cable USB cable USB cable Power cord(NA) Power cord(EU) Power cord(NA) Power cord(UK) -
Page 6: Touchmonitor Connections
Connector Panel & Interfaces Touchmonitor Connections 1. Connect the VGA input connector of the display with the VGA video source by using the VGA video cable. Tighten the screws of the video cable for optimal performance. 2. Connect the USB/serial touch cable between the monitor’s USB/serial connector and your PC’s USB/serial port. - Page 7 Installing the Touch Technology Software Drivers Some software installation is required for your touchmonitor to work with your computer. No additional drivers are required for your projected-capacitive touchmonitor, it uses Windows HID drivers. To download latest touch drivers 1. Visit Downloads | Elo®...
-
Page 8: Chapter 3: Mounting
Chapter 3: Mounting Rear VESA Mount For the 15-inch touch monitor, a four-hole 75x75mm mounting pattern for M4 screws is provided on the rear of the monitor. Remove the stand using a Phillips screwdriver to access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-D, 75, C. For the 17-inch and 19-inch touch monitor, a four-hole 100x100mm mounting pattern for M4 screws is provided on the rear of the monitor. -
Page 9: Base Mount
Base Mount For the 15-inch touch monitor, a threaded three-hole mounting pattern for M4 screws is provided on the bottom of stand base for mounting or securing. For the 17-inch, a threaded three-hole mounting pattern for M4 screws is provided on the bottom of stand base for mounting or securing. - Page 10 For the 19-inch, a threaded three-hole mounting pattern for M4 screws is provided on the bottom of stand base for mounting or securing. User Manual: 1515L, 1715L, 1915L UM600623 Rev A, Page 10 of 26...
-
Page 11: Chapter 4: Operation
Chapter 4: Operation Power To turn the touchmonitor on or off, press the touchmonitor power button once. The Power Status LED on the bottom of the touchmonitor functions according to the following table: Touchmonitor status LED status SLEEP PULSING The system consumes low power when in SLEEP and OFF modes. For detailed power consumption specifications, refer to the technical specifications available on the Elo website www.elotouch.com. -
Page 12: On-Screen Display (Osd)
Video A display’s native resolution is its width and height measured in number of pixels. Generally, for best performance, an image displayed on this monitor will look best when your computer’s output resolution matches this monitor’s native resolution, which is 1024 x 768 for the 15-inch products, or 1280 x 1024 for the 17-inch and 19-inch products. - Page 13 The OSD buttons control an on-screen graphical user interface, which displays on top of your input video. This allows for intuitive adjustment of the following display parameters: Parameter Available Adjustment Increase/decrease monitor brightness Brightness Default: 17-inch 80, 15-inch 100 Increase/decrease monitor contrast Contrast Default: Best gray-shade performance Allows fine adjustments of the panel’s pixel dot clock.
- Page 14 they are entered. This feature saves you from having to reset your choices every time the touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor settings will not default to the factory specifications. OSD and Power Lockouts Press and hold the "Menu"...
-
Page 15: Chapter 5: Technical Support
Chapter 5: Technical Support If you are experiencing trouble with your touchmonitor, refer to the following suggestions. If the problem persists, please contact your local dealer, or contact Elo Touch Solutions Customer Service. Solutions to Common Problems Problem Suggested Troubleshooting... -
Page 16: Image Sticking
Image Sticking What is Image Sticking? What Causes Image Sticking? Image persistence, image burn-in, and image sticking are terms used to describe LCD image retention. LCD image retention occurs when a fixed pattern is displayed over a prolonged period of time. The fixed pattern causes a parasitic capacitance to build up within the LCD component, which prevents the liquid crystal molecules from returning to their normal relaxed state. -
Page 17: Technical Assistance
Technical Assistance Visit www.elotouch.com/products for technical specifications for this device Visit www.elotouch.com/go/websupport for online self-help. Visit www.elotouch.com/go/contactsupport for technical support. See this user manual’s last page for worldwide technical support phone numbers. User Manual: 1515L, 1715L, 1915L UM600623 Rev A, Page 17 of 26... -
Page 18: Chapter 6: Safety & Maintenance
Chapter 6: Safety & Maintenance Safety To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor. They are not user serviceable. Ensure that your installation is equipped to maintain the specified environmental conditions listed in the Technical Specifications chapter. Care and Handling The following tips will help keep your touchmonitor functioning at an optimal level: •... -
Page 19: Waste Electrical & Electronic Equipment Directive (Weee)
Waste Electrical & Electronic Equipment Directive (WEEE) This product should not be disposed of with household waste. It should be deposited at a facility that enables recovery and recycling. Ensure that product is disposed at the end of its useful life according to local laws and regulation. Elo has put in place recycling arrangements in certain parts of the world. -
Page 20: Chapter 7: Regulatory Information
Chapter 7: Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed. - Page 21 This Information Technology Equipment (ITE) is required to have a CE Mark on the Manufacturer’s label which means that the equipment has been tested to the following Directives and Standards: This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 2014/30/EU as indicated in European Standard EN 55032 Class B and the Low Voltage Directive 2014/35/EU as indicated in European Standard EN 60950-1.
- Page 22 In accordance with FCC Rules and Regulations Model Number: ET1515L/ET1715L/1915L-xxxB Equipment Category: Information Technology and Telecommunications Equipment Equipment Class: Commercial and Light Industrial Product Name: Touch Monitor Manufacturer: Elo Touch Solutions, Inc. 670 N. McCarthy Blvd. Suite 100 Milpitas, CA 95035 www.elotouch.com Trademark: Declaration: This device complies with Part 15 of the FCC Rules.
-
Page 23: Agency Certifications
III. Agency Certifications The following certifications and marks have been issued or declared for this monitor: Australia RCM Europe CE Mexico NOM Canada CUL, IC Japan VCCI Taiwan BSMI China CCC Korea KC United States FCC, UL IV. China RoHS In accordance with Chinese law (Administration on the Control of Pollution Caused by Electronic Information Products), the section below lists out the name and amount of the toxic and/or hazardous materials that this product may contain. -
Page 24: Power Adapter Specifications
Operating Temperature:0-40 / Humidity:20%-80% (non-condensing). Storage Temperature:-20~60 / Humidity:10%~95% (non-condensing). (2). It is encouraged and recommended that this product be recycled and reused according to local laws. The product should not be thrown away casually. V. Power Adapter Specifications Electrical Ratings: Input: 100-240VAC, 50/60Hz Output: 12VDC, minimum 4.16A, LPS VI. -
Page 25: Chapter 8: Warranty Information
Chapter 8: Warranty Information for more information http://www.elotouch.com/Support/warranty.asp User Manual: 1515L, 1715L, 1915L UM600623 Rev B, Page 25 of 26... - Page 26 • Upcoming events • Press releases • Software drivers Getting in Touch with us To find out more about the extensive range of Elo touch solutions, visit our website at www.elotouch.com, or simply call the office nearest you: Europe Asia-Pacific...
Need help?
Do you have a question about the ET1515L and is the answer not in the manual?
Questions and answers