Advertisement
Quick Links
5/21/24, 11:11 AM
TriSensor 8 user guide
Modified on: Tue, 30 Apr, 2024 at 12:10 PM
Aeotec TriSensor 8 was developed to detect ambient values and movement and to transmit them with
(http://aeotec.com/z-wave-plus)
technology. You can find out more about
To see whether TriSensor 8 is known to be compatible with your Z-Wave system or not, please reference our
gateway comparison
(https://aeotec.com/compatibility/)
(https://aeotec.freshdesk.com/a/solutions/articles/6000264544)
Get to Know your TriSensor 8.
Your TriSensor comes packaged with a number of accessories that will help with its installation and operation.
Package Contents:
1. TriSensor
2. Battery Cover
3. Double-Sided Tape
4. Screws (×2)
5. Back Arm Mount
6. Warranty Card
7. Quick start guide
https://aeotec.freshdesk.com/support/solutions/articles/6000264543-trisensor-8-user-guide
. It is powered by Aeotec's
TriSensor 8
(https://aeotec.com/products/aeotec-tri-sensor/)
TriSensor 8 user guide : Aeotec Help Desk
Gen8
(https://aeotec.com/z-wave-home-automation/z-wave-gen7.html)
listing. The technical
specifications of TriSensor 8
can be viewed at that link.
Z-Wave Plus
by following that link.
Z-Wave
1/9
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Aeotec TriSensor 8
Summary of Contents for Aeotec TriSensor 8
- Page 1 You can find out more about TriSensor 8 by following that link. (https://aeotec.com/products/aeotec-tri-sensor/) To see whether TriSensor 8 is known to be compatible with your Z-Wave system or not, please reference our Z-Wave gateway comparison listing. The technical specifications of TriSensor 8 (https://aeotec.com/compatibility/)
- Page 2 5/21/24, 11:11 AM TriSensor 8 user guide : Aeotec Help Desk Button Functions. Action button press LED Status Function When batteries are Blinks between rainbow LED indication to indicate it is factory reset and ready to inserted (when factory colors be paired.
- Page 3 LED will disappear as soon as you release its button. Press and hold [3 seconds) blinks Blue once The TriSensor 8 will immediately send a wakeup report to your Z-Wave Controller to take in any queued z-wave commands waiting in your controller when the LED flashes blue.
- Page 4 TriSensor 8 is intended for use in dry locations only. Do not use in damp, moist, and/or wet locations. Do not use rechargeable CR123A batteries.
- Page 5 TriSensor 8 user guide : Aeotec Help Desk Quick Start. Power up TriSensor 8. TriSensor 8 can only be battery-powered, you must first power up your TriSensor before you can pair it and use it in your Z-Wave network. Steps.
- Page 6 TriSensor 8 user guide : Aeotec Help Desk This section will go over brief steps to connecting TriSensor 8, for further details on connecting this product to your hub, click on the hub that you have to access more detailed steps. ...
- Page 7 There are some placement considerations when using the TriSensor 8 as a motion sensor. Above are some diagrams that show the distance at which the wall or ceiling installations can perform based on the height TriSensor 8 is installed, as well as the angle.
- Page 8 Your TriSensor 8 can be removed from your Z-Wave network at any time. You'll need to use your Z-Wave network's main controller to do this and the following instructions tell you how to do this. If you are using other products as your main Z- Wave controller, please refer to the part of their respective manuals that tells you how to remove devices from your network. ...
- Page 9 There are further advanced parameter settings and group association settings not listed in this guide. You can find the attachment of the advanced engineering sheet of the TriSensor 8 which will give you all possible functions of the TriSensor 8 that may be missing in this guide. ...
Need help?
Do you have a question about the TriSensor 8 and is the answer not in the manual?
Questions and answers