Advertisement
Power Distribution
Assembly
NOTE:
It is not necessary to remove the
Power Distribution Assembly from the chassis in order
to remove the Power Protection Bracket.
This view is used to indicate the location of the bracket.
6. Install the proper tape drive rails on the selected tape drive and install the tape drive in the server.
7. Replace the system fan assembly and tighten the thumbscrew.
8. Close the server and replace the external cables and power cord.
9. Power up the server and return it to normal operation.
HP Part Number 5990-3463
Figure 7. Removing the Power Protection Bracket
Bracket is
accessible from
this position
Captive Screw
Power Protection
Bracket
7
Advertisement
