Page 3
Keep cutting tools sharp and clean. Properly b) Use personal protective equipment. Always maintained cutting tools with sharp cutting edges 20V Cordless WX101 WX101.1 WX101.2 Drill Driver WX101.5 WX101.7 WX101.9...
Page 4
After extended periods of storage, it may be necessary to charge and discharge 1) Safety instructions for all operations the battery pack several times to obtain a) Hold the power tool by insulated gripping 20V Cordless WX101 WX101.1 WX101.2 Drill Driver WX101.5 WX101.7 WX101.9...
Page 5
Do not burn n) Recharge only with the charger specified by WORX. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Page 9
18 volts. -- Removing the bits See Fig. B1 ACCESSORIES -- Inserting the bits See Fig. B2 OPERATION WX101 WX101.1 WX101.2 WX101.5 WX101.7 WX101.9 FORWARD/REVERSE ROTATION Battery pack CONTROL (WA3551.1) WARNING: Never change See Fig. C1, C2, C3...
Page 10
2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED. WHY? Verify the torque position of the torque adjusting ring. Find the torque adjusting ring between the chuck and the drill body. Position 1 is the lowest 20V Cordless WX101 WX101.1 WX101.2 Drill Driver WX101.5 WX101.7 WX101.9...
Need help?
Do you have a question about the WX101.2 and is the answer not in the manual?
Questions and answers