Shimadzu CBM-20A Setup Manual page 7

■
Analysis Execution Application
Section
(1) Direct control buttons
(2) Method parameter
settings (simplified)
Description
The following control functions are available for the units
connected to the system controller.
Turning the pump ON/OFF
Rinsing the autosampler
Turning the column-oven ON/OFF
Zeroing the detecto
r's signal
Executing autopurge
And others
The following items can be set for the units connected to the
system controller. For settings of other items, use the IE
version web application.
Pump flowrate and concentration
Autosampler's cooler temperature
Column-oven temperature
Detector wavelength
(1) Direct control buttons
(2) Method parameter settings
(simplified)
5