Technical Data; General Data - Rieber thermoport K 1000 Manual

Description of the Appliance
5.2

Technical data

5.2.1

General data

5.2.1.1 Electrical connection
Rated voltage / mains frequency
Electrical connection
5.2.1.2 Protection class
# Protection class for heated TP
Protection class for TP in working
condition with mains plug inserted
Protection class for heating unit in
disassembled condition
# Protection class for stainless steel TP for cold holding with active circulating air cooling
Protection class for TP in working
condition with mains plug inserted
Protection class for circulation fan
in disassembled condition
5.2.1.3 Housing
Housing /
door / lid
Mobile appliance
20
1N AC 230 V 50/60 Hz
Around 2 m cable length; type H05RN-F 3x1.0 mm
IPX4 according to DIN EN 60529
→ Protection against water splashes on all sides
IPX3 according to DIN EN 60529
→ Protection against falling spray water up to 60° from vertical
IPX4 according to DIN EN 60529
→ Protection against water splashes on all sides
IPX3 according to DIN EN 60529
→ Protection against falling spray water up to 60° from vertical
Made of chromium-nickel steel: Carcass with double-wall insulation,
interior seal-welded.
Door / lid have an elastic seal. The seal is removable.
Temperature-resistant between -20 °C and +85 °C.
Made of plastic: Non-porous plastic skin, seal-welded.
The plastic cover fits positively, small gap width.
Temperature-resistant from -20 °C to +85 °C.
4 corner guards. Plastic castors, wheel diameter 125 mm. 2 steering
and 2 swivel castors.
Stainless steel castors and antistatic tyres on request.
2
Rieber GmbH & Co. KG