Page 1
ULISESevo ™ SPECIAL NEEDS STROLLER USER MANUAL...
Page 2
CAUTION! Manufacturer takes responsibility for proper usage of the device only when the product was purchased from qualified Akces-Med employee or at specialized medical store! CAUTION! AKCES-MED Ltd. reserve the right to introduce technical and trading changes in the content of the instruction without warning.
Page 4
7. The use of stroller....................44 7.1. Preparation of the patient................44 7.2. How to use stroller..................45 7.3. How to use vest..................46 8. Safety rules......................49 9. Maintenance and cleaning.................52 10.Labelling......................54 10.1. Symbols....................54 10.2. Example of identification plate.............55 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 5
The backrest can be easily bend back and adjustable push handle increases the stroller maneuverability. Rich equipment and wide range of adjustments make ULISES EVO™ fit easily to the individual needs. If you have any questions or remarks, do not hesitate to contact with us: Medical consultant: mobile +48 508 382 509 Akces-MED Sp.
The present user manual contains basic information which is essential for proper usage, preparation, maintenance, cleaning and guarantee conditions regarding ULISES EVO™ stroller. User manual should be kept in easily accessible place. It is designed for people who look after disabled children, and for both doctors as well as physiotherapists who operate the device.
Page 11
Carrier bag for the stroller Under seat storage basket ULE_507 ULE_509 ULE_701 ULE_707 Rear inflatable wheel Front inflatable wheel Organizer bag Oxygen tank holder ULE_704 ULE_723 ULE_711 Rear PU wheel Front PU wheel Comfort Upholstery www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Note: Approximate values, depending on the product configuration. Note: In extreme positions of the handle, it may collide with the backrest when changing its angle. In such cases, the handle should be raised while adjusting. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
STEP 3. Pull the strap located in the back of the backrest (fig.4) and simultaneously fig.3 push the backrest forward until it stops (fig.5) (Backrest tilt angle adjustment → see page 17, point 5.6.1). fig.4 fig.5 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
(fig.7) and push the backrest forward until it stops (fig.8-10). fig.7 fig.10 fig.9 fig.8 5.2. Unfolding the stroller To unfold the stroller, you should: STEP 1. Pull the stroller's handle backwards until the folding mechanism snaps. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
STEP 1. Remove the quick connectors from both sides of the stroller. (fig.13); STEP 2. Set the desired height of the footrest (fig.14); STEP 3. Put the quick connectors into holes; fig.13 fig.14 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
(fig. 17a) and rear inflatable wheels (fig. 17b) with a central brake. In order to block or unblock the wheels, move the red element located at the rear axle of the wheels (fig. 18). fig.17a fig.17b fig.18b fig.18a www.akces-med.com +48 17 864 04 77 export@akces-med.com...
CAUTION! Pulling the strap without pushing the backrest first may damage the backrest angle adjustment. Pay special attention in case when the user is in the stroller and is leaning against the backrest. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Maximum depth setting of the seat is indicated by the retaining pins coming into holes located at the both side of the seat frame. To decrease the seat depth, after reaching its maximum position, push the retaining pins inside the frame. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Afterwards, secure them using knob placed on the other side. STEP 3. Connect the belts (fig.29) and insert them into buckle located at the seat (fig.30). www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 20
CAUTION! Each time before using 5-point belts, you should check if: Buckles do not stretch of the pressing force · Buckles and belts do not move as a result of · improper attachment www.akces-med.com +48 17 864 04 77 export@akces-med.com...
In order to mount the Thigh abduction belt, you should: STEP 1. Detach the two plastic strap adjusters (pic.35). STEP 2. Put the belts on the seat (breathable fabric should be facing up, pic. 36). fig.37 fig.38 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 22
STEP 5. Then, attach the plastic strap adjuster (the one that you previously detached in STEP 1) to the belt (pic. 40). fig.42 STEP 6. Slide the end of the belt into the snap buckle (pic. 41-42). fig.43 fig.44 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
46). You can adjust the position of the belt by putting the straps into the different holes (higher or lower ones). Fasten the straps behind the backrest by use of Velcro (pic. 47-48). fig.47 fig.48 fig.49 fig.50 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 24
(pic.50-51). Repeat on the other side of the stroller. fig.51 fig.52 fig.53 STEP 3. Afterwards, pass the remaining strap with buckle (1) as indicated in the pictures below (pic. 52-54). fig.54 fig.55 fig.56 www.akces-med.com +48 17 864 04 77 export@akces-...
This kind of headrest is highly indicated for patients with head-dropping problems. In order to mount the headrest, put the headrest straps into the holes placed in the backrest upholstery. Fasten the strap behind the backrest using Velcro. fig.61 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
6.7. ULE_126 Trunk belt The trunk belt can be easily cut to any length. In order to do that, you should: STEP 1. Unfasten the belt from the back (pic. 64). fig.66 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
STEP 2. Slide the abduction block bar into the handle placed in the seat upholstery fig.71 (pic. 69). STEP 3. Tighten the abduction block to the seat by use of Allen screw (pic. 70, 71). www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Narrowing pads (set) 10 cm ULE_137 Cushions can only be attached to the seat along with the rigid side supports (low or high) that are trimmed with one-sided Velcro material (see page 30, 31). fig.76 fig.77 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
(pic. 77, 78). fig.78 fig.80 fig.79 The supports are covered with one-sided Velcro material which means that you can attach to it any patient-stabilizing elements that are equipped with Velcro e.g. seat narrowing cushions. fig.81 www.akces-med.com +48 17 864 04 77 export@akces-med.com...
The supports are covered with one- sided Velcro material which means that you can attach to it any patient- stabilizing elements that are equipped with Velcro e.g. seat narrowing cushions. fig.85 fig.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
(pic. 85). fig.86 fig.35 fig.87 fig.35 STEP 2. Slide the end of the strap into the plastic strap adjuster located on the other side (pic. 86-88). fig.88 fig.35 fig.89 fig.90 fig.35 fig.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Page 32
STEP 5. Attach the upper part of the vest at the desired height and secure it with the knob from the back (pic. 88, 89). fig.96 fig.35 fig.97 fig.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
STEP 2. The 6-point safety vest has additional security in the form of a long strap with snap buckle that should be passed around the backrest and fastened from the other side of the vest (pic. 92-95). fig.100 fig.101 fig.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Page 34
Information on how to safely use the VEST can be found on the page 45 of the instruction. Improper use and not obeying the safety rules may endanger the user's health and life. www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
STEP 3. Set the desired position of the umbrella using the button (pic. 105). fig.112 fig.111 fig.113 fig.114 ULE_403 6.16. Tray In order to mount the tray, you should: STEP 1. Place the tray hooks onto the selected frame elements (pic. 107-108). fig.115 fig.116 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Folding canopy Folding canopy mounting set 1. Ø19 mm pipes with the holders (2 pcs), 2. Holder clamp (2 pcs), 3. Hex key 5 mm, 4. Folding canopy. fig.121 fig.120 fot.44 fot.35 fot.44 fot.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Page 37
STEP 2. Next, insert the pipe with the folding canopy holder (1) into the Ø19 clamp (2) on the demanded height and tighten it. fig.126 fig.127 fot.44 fot.35 fot.44 fot.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Page 38
Repeat STEP 1 and STEP 2 on the other side of the stroller. STEP 3. Put the folding canopy into the mounted holders and unfold it for use. fig.133 fig.132 fot.44 fot.35 fot.44 fot.35 fig.134 fig.135 fot.44 fot.35 fot.44 fot.35 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
STEP 1. Loosen the clamp and put it on the stroller frame (pic. 117). STEP 2. Tighten the knob (pic. 118). STEP 3. Set the desired position using the button (pic. 119). fig.31 fig.125 fig.126 fig.70 fig.69 fig.31 fig.127 fig.128 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
In order to mount the conversion kit which allows tilt angle adjustment, you should: STEP 1. Prepare necessary tools and components: · Conversion kit · Allen wrench 3 mm · Allen wrench 6 mm fig.131 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
You can attach the bags to the stroller's backrest or push handle. It also can be worn on the shoulder thanks to its long, adjustable strap. fig.136 fig.31 fig.137 fig.31 fig.138 fig.31 fig.139 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Under seat basket can be mounted to the chassis frame by use of latches (pic. 132-135). fig.31 fig.140 fig.141 fig.31 fig.142 fig.143 6.23. ULE_444 Armrests To mount the armrests, install a special handle to the frame of the stroller. fig.157 fot.31 fig.158 www.akces-med.com +48 17 864 04 70 produkcja@akces-med.com...
Remember to use the product only with someone who is trained and knowledgeable. Do not forget to prepare both product as well as patient before using ULISES EVO™ stroller! 7.1. Preparation of the patient Before using the product, it is essential to make sure that: ·...
It is forbidden to force child to keep specific position because he/she will feel uncomfortable and it may lead to wrong posture. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
If, however, we want to stabilize the patient's body properly, we should use a dynamic orthopedic vest, e.g. a Flex-point vest, which does not cause the breathing difficulty for the patient. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 47
3) Special attention should be paid to ensuring that the entire foot of the patient has stable support. If the device is not equipped with a foot support, the patient's feet must rest firmly against the ground. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 48
The vest must always be dry before usage. If you have any doubts or questions about the use of the vest, please contact your doctor or physiotherapist. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
It is highly important to secure patient because it safeguards him/her from falling out. If abduction contracture occurs, it is recommended to use abduction block in order to prevent ulcers between knees. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 50
11. Secure stroller during transportation in order to avoid any possible damages. Manufacturer doesn't take responsibility for damages which appeared due to improper preparation of the device during transportation. www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 51
CAUTION! The weight of user should not be bigger than maximal weight described on page 12 where you will find information regarding this issue. 1) AKCES-MED Sp. z. o. o sells products free from manufacturing defects or faults. 2) Manufacturer gives the purchaser 24-month guarantee from the date of purchase.
4. It is forbidden to clean upholstery with strong chemical agents such as solvent or caustic chemicals. CAUTION! Akces-MED. Sp z o. o takes no responsibility for damages caused by use of wrong clearing agent. 5. It is forbidden to soak upholstery during cleaning. Remember that upholstery has to be always dry before using.
Page 53
CAUTION! In case of any damages, it is essential to contact the person who sold you the product. www.akces-med.com www.akces-med.com +48 17 864 04 77 +48 17 864 04 77 export@akces-med.com...
Name of product in you are directed to English the website of the product Date of production Producers address Labeling - look above Serial number in the form of a bar code Serial number www.akces-med.com +48 17 864 04 77 export@akces-med.com...
Page 56
ORTHOPAEDIC DEVICES MANUFACTURER Akces-MED Sp. z o.o. Jasionka 955B 36-002 Jasionka tel. (17) 864 04 77 www.akces-med.com e-mail: export@akces-med.com Authorised Dealer Date of issue: 02.02.2015 The last update: 12.12.2019...
Need help?
Do you have a question about the ULISES EVO and is the answer not in the manual?
Questions and answers