Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Title 24 Compliant
Motion Sensor
Wall Switch
6106
The 6106 motion sensor wall switch meets Cali-
forniaTitle 24 regulations for kitchens, bathrooms,
laundry rooms, hallways, dining rooms, and
bedrooms. The push button turns lights on or off
manually and activates or deactivates the motion
sensor. The motion sensor keeps lights on for a
set period of time after motion is last detected.
The motion sensor and lights are then turned off
and must be turned on again by pushing the ON
button before motion will be detected.
The unit has excellent sensitivity and a wide 180°
detection range. It can be used with incandescent
lighting as well as fluorescent lighting. Two LEDs
allow for easy status identification.
Installation is as easy as replacing a wall switch.
Some codes require installation by a quali-
fied electrician.
Items included in packaging:
• Sensor Switch
• Cover Plate
• 3 Wire Connectors
• 2 Large Screws
• 2 Small Screws
• Owner's Manual
Features include:
• 180° motion detection angle
• Selectable on-time from 5 seconds to 25
minutes
• Works with incandescent and fluorescent
lighting
• Works with motors up to 1/8 hp
• Motion sensor is turned on and off by push
button
© 2005 DESA Specialty Products™
INSTALLATION
SELECT A LOCATION
The sensor is more sensitive to motion across
the front of the sensor than to motion towards
the sensor.
The detector senses heat in motion and possibly
heat sources that change temperature quickly.
Therefore, to avoid false triggering, avoid placing
the sensor where it will be aimed at air conditioners,
heaters, and other sources of heat or cold.
30 ft. (9.1 m)
15 ft. (4.6 m)
Figure 1 - Typical View of Coverage
Motion Sensor
Motion Sensor
ON/OFF LED
Indicator
Switch Power
LED Indicator
Motion Sensor
ON/OFF
Button
180°
598-1232-01
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Heath Zenith SL-6106-WH - Heath - Vacancy Motion Sensor Wall Switch
Summary of Contents for Heath Zenith SL-6106-WH - Heath - Vacancy Motion Sensor Wall Switch
- Page 1 Title 24 Compliant Motion Sensor Motion Sensor Motion Sensor Wall Switch ON/OFF LED Indicator 6106 Switch Power LED Indicator The 6106 motion sensor wall switch meets Cali- forniaTitle 24 regulations for kitchens, bathrooms, Motion Sensor laundry rooms, hallways, dining rooms, and ON/OFF bedrooms.
- Page 2 TESTING WARNING: Turn power off at the 1. Remove the decorative cover plate (secured by circuit breaker before wiring. two small screws). 2. Pinch control panel cover at the indicated points INSTALLING SENSOR as shown in Figure 3. Pull to remove cover. Typical Installation 1.
-
Page 3: Completing Installation
(5 second) position (see Figure 4). Turn the decorative wall plate. In installations where power back on at the circuit breaker. the Heath /Zenith motion sensor switch is ® 4. Verify the switch has power. The bottom LED combined with other switches or outlets on will be lit. -
Page 4: Troubleshooting
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE SOLUTION Light does not come 1. Circuit breaker or fuse is 1. Turn circuit breaker on. turned off. 2. If the lamp being controlled 2. Turn other switch on. has another switch, it may be turned off. 3 Bulb is burned out. -
Page 5: Five Year Limited Warranty
FIVE YEAR LIMITED WARRANTY This is a “Limited Warranty” which gives you specific legal rights.You may also have other rights which vary from state to state or province to province. For a period of five years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. - Page 6 Detector de movimiento Conforme al título 24 Indicador LED Interruptor de ENCENDIDO/ APAGADO del Pared y Detector detector de movimiento de Movimiento Indicador LED 6106 del interruptor de alimentación Eldetectordemovimiento6106cumpleconlosregla- mentosTítulo24deCaliforniaparacocinas,cuartosde Botón baño, lavanderías, pasillos, comedores y dormitorios. ENCENDIDO/ El pulsador enciende o apaga manualmente las luces APAGADO del y activa o desactiva al detector de movimiento.
- Page 7 PRUEBA ADVERTENCIA: Apague la energía 1. Quite la placa cubertora decorativa (asegurada en el cortacircuitos antes de hacer las con dos tornillos decorativos). conexiones. 2. Apriete la tapa del panel de control en los puntos indicados en la Figura 3. Hale para retirar la INSTALACION DEL DETECTOR tapa.
-
Page 8: Especificaciones
4. Verifique que el interruptor tiene energía. El vimiento Heath ® /Zenith con otros interruptores LED inferior estará encendido. o enchufes en una caja extendida, se necesitará 5. Deje que el detector se estabilice (más o menos comprarunaplacacombinadoradepared.Varias... -
Page 9: Guia De Solucion De Problemas
GUIA DE SOLUCION DE PROBLEMAS SÍNTOMA CAUSA PROBABLE SOLUCIÓN La luz no enciende. 1. El disyuntor o el fusible está 1. Conecte el disyuntor. desconectado. 2. Si la lámpara está controlada 2. Encienda el otro interruptor. desde otro interruptor, este puede estar apagado. - Page 10 GARANTÍA LIMITADA A 5 AÑOS Esta es una “Garantía Limitada” que le da a Ud. derechos legales específicos. Usted puede también tener otros derechos que varían de estado a estado o de provincia a provincia. Por un período de 5 años desde la fecha de compra, cualquier mal funcionamiento ocasionado por partes defectuosas de fábrica o mano de obra será...
- Page 11 Détecteur de mouvement Conforme au Title 24 Voyant à DEL Interrupteur mural d’ACTIVATION/ DÉSACTIVATION à détecteur de du détecteur de mouvement mouvement Voyant à DEL de 6106 l’interrupteur L’interrupteur mural à détecteur de mouvement 6108estconformeàlaréglementationcalifornienne Bouton Title 24 pour ce qui est des cuisines, salles de bain, d’ACTIVATION/ salles de lavage, entrées, salle à...
- Page 12 ESSAIS M I S E E N G A R D E : C o u p e r 1. Enlever la plaque décorative (fixée au moyen l'alimentation au disjoncteur avant de de deux vis). faire le câblage. 2. Pincez le panneau de commande aux endroits indiqués dans la Figure 3.
- Page 13 à détection de mouvement Le voyant à DEL du bas devrait être allumé. Heath /Zenith est combiné à d’autres interrup- ® 5. Attendez environ une minute pour que le teurs muraux ou à d’autres prises sur un boîtier détecteur se stabilise;...
-
Page 14: Dépannage
DÉPANNAGE SYMPTÔME CAUSE PROBABLE SOLUTION L’éclairage ne s’al- 1. Le disjoncteur est désenclenché 1. Réenclenchez le disjoncteur. lume pas. ou le fusible est grillé. 2. Si l’appareil commandé est 2. Ouvrez l’interrupteur. doté d’un autre interrupteur, ce dernier est peut-être fermé. 3. -
Page 15: Garantie Limitée De 5 Ans
GARANTIE LIMITÉE DE 5 ANS Il s’agit d’une « Garantie limitée » qui vous confère des droits juridiques spécifiques. Vous pouvez également jouir d’autres droits, variables d’une province à l’autre. Pendant une période de 5 ans à compter de la date d’achat, toute anomalie de fonctionnement imputable à un vice de matériau ou de main-d’oeuvre sera corrigée gratuitement. - Page 16 NOTE / NOTA ______________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ __________________________ 598-1232-01...
Need help?
Do you have a question about the SL-6106-WH - Heath - Vacancy Motion Sensor Wall Switch and is the answer not in the manual?
Questions and answers