Vollrath JW30 Operator's Manual

35" Cheese Melters
Thank you for purchasing this Vollrath® product! Save this manual
for reference and the packaging in case shipping is necessary.
SAFETY PRECAUTIONS
To help ensure safe use, please read and fully understand this
manual and all safety messages before operation!
WARNING
Warning indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Caution indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.

NOTICE: Addresses practices not related to physical injury.
To reduce risk of injury or damage to the unit
• Use only grounded electrical outlets matching the
nameplate-rated voltage.
• Use unit in a flat, level position.
• Do not use an extension cord or plug this unit into a power strip
or multi-outlet power cord.
• Before cleaning or moving, turn the unit off, allow it to cool, and
unplug it.
• Do not spray controls or outside of unit with liquids or cleaning
agents.
• Do not clean the unit with steel wool.
• Keep unit and power cord away from open flames, electric
burners, and excessive heat.
• Operate in non-public areas, away from children—and attend
the unit during use.
• Only operate a unit that is functioning properly and is not
damaged.
• Clean the unit daily per the instructions in this manual.
• Do not set anything on top of the unit or door; never stack units.
• The unit may be hot, even though the indicator light is off.
• After unplugging, the heating element and surrounding
components could be hot and should not be touched or placed
on combustible surfaces.
• If the supply cord is damaged, it must be replaced by the
manufacturer, service agent, or a qualified person in order to
avoid a hazard.
Operator's Manual
Item Model
CM4-20835
JW30
CM4-24035
FUNCTION AND PURPOSE
This unit is intended to melt cheese and finish cooked foods
such as nachos, cheese fries, potato skins, and garlic bread in
higher-volume food service operations and large restaurants. It
is not intended for household, industrial, or laboratory use.
UNPACKING THE UNIT
When no longer needed, dispose of all packaging and materials
in an environmentally-responsible manner.
1. Remove packing material, tape, and protective plastic.
2. Clean glue residue left over from the plastic or tape.
3. Install the four legs and feet onto the unit.
Part 351019-1
Description
Cheese Melter, 208V
Cheese Melter, 240V
9/25/2024