HermanMiller Aeron AE901 Replacement Instructions

Arm pad kit

Download this manual

HermanMiller

Aeron

Arm Pad Replacement Instructions

Aeron Arm Pad Kit (AE901)

How to replace and assemble your

arm pads.

Tools Required

#2 Phillips Screwdriver

Step 1

1.1 Place chair on protective surface and lay chair with the seat and back

facing down.

HermanMiller for Aeron

Parts Included

Arm Pad (Qty 2)

Safety Instructions & Warning

• Read all instructions before using products

• Failure to fully tighten screws may cause injury

• Sitting or standing on product may cause risk or personal injury

• Periodically check fasteners to ensure tightness

• The right is reserved to make changes at any time without notice

Step 2

2.1 Using #2 phillips screwdriver remove screws.

1BFFV7 rev C

Flat Head #13 hi

lo thread screws

(Qty 4)

Assembly Instructions

Need help?

Do you have a question about the Aeron AE901 and is the answer not in the manual?

Page 1 • The right is reserved to make changes at any time without notice Step 1 Step 2 2.1 Using #2 phillips screwdriver remove screws. 1.1 Place chair on protective surface and lay chair with the seat and back facing down. HermanMiller for Aeron 1BFFV7 rev C Assembly Instructions ®...
Page 2 Tighten screws plus a quarter turn. For more information about our products and services please visit us at hermanmiller.com or call (800) 851 1196. ©2016 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BFFV7 – C ® Y, HermanMiller for Aeron ®...