Care And Cleaning; Technical Data; Warranty - GEHA A4 BASIC Manual

5. If you want to use cold pouches when the laminator is in hot condition, please push the
sliding switch from the right position to the left position, and wait for approx. 3 hours
until the LEDs turn from blue to red.
6. Insert the sealed edge of the laminating sleeve straight into the CENTRE of the
laminator opening.
7. Remove the sleeve from the rear of the machine after is has stopped moving.
8. Some types of paper do not laminate evenly, or appear somewhat cloudy. In such cases,
the lamination can be fed through the machine a second time and the lamination process
may be repeated.
9. If there is a jam, please press the ABS button located at the back of the machine.
The laminator will stop then. Please pull out the laminating pouches with one hand slowly.

CARE AND CLEANING

Only authorised service teams should perform any servicing other than cleaning and user
maintenance. Do not immerse in water.
To reduce the risk of fire or electrical shock, do not remove the base. No user serviceable parts
are inside. Repair should be done by authorised service personnel only.
• Keep your hands and the cord away from hot parts of the appliance during operation.
• Never clean with scrubbing powders or hard implements.
• Wipe clean with a soft cloth.

TECHNICAL DATA

Voltage
Current
Power
Film thickness
Max. document size
Warm-up time
Laminating speed
Max. document thickness
DISPOSAL
The crossed out wheelie bin symbol on this product is to remind you that
electrical products should not be disposed of with household waste.
Please dispose of in a responsible manner at an approved waste or recycling facility.

WARRANTY

The warranty period for your appliance is 24 months.
It is essential that you retain your proof of purchase and the original packaging.
Should any problem arise with your appliance, please contact your dealer.
230 V-240 V, 50/60 Hz
1.1 A
max. 265 W
80-100 microns (8 1/4" x 11 3/4")
A4
approx. 3-5 mins
approx. 230 mm/min
0.6 mm
9