Page 1
PROTEOR MICROPROCESSOR ANKLE/FOOT SYSTEM EN Instruction for use FI Käyttöohjeet PL Instrukcja użytkowania FR Notice d’Utilisation DE Gebrauchsanweisung CS Návod k použití SK Návod na používanie IT Istruzioni per l’uso ES Instrucciones de uso HR Upute za uporabu RU Инструкция по использованию...
Page 2
PROTEOR MICROPROCESSOR ANKLE/FOOT SYSTEM INSTRUCTIONS FOR USE English...
Connecting & Pairing to Kinnex via App Check Battery Charge Level via App Change Shoes Option via App Making Minor Adjustment to Kinnex via App Connecting/Tools via App Tools Utilization within App Warranty Cleaning Technical Support Electromagne�c Compa�bility Precau�ons CE Conformity Kinnex 2.0 Product Detail...
| Instruc�ons for Use PROTEOR | Kinnex 2.0 Product Descrip�on Kinnex is a microprocessor controlled hydraulic ankle/foot that monitors sensors to control plantar and dorsiflexion resistance. Warnings / Safety Precau�ons Intended Use Kinnex is intended for use by individuals with lower limb amputa�ons who would benefit from improved gait dynamics,...
| Instruc�ons for Use PROTEOR | Kinnex 2.0 Alignment 1.5 cm With the Kinnex connected to the GaitLab app, select “Bench Alignment”. This will lock the ankle at a neutral alignment posi�on on a 3/8” heel height. The weight line should fall at or up to 1.5cm anterior to the anterior dome of the pyramid.
| Instruc�ons for Use PROTEOR | Kinnex 2.0 Basic Opera�ons Battery Charge Level To manually check the charge level of Kinnex when • unplugged (discharging) using the button located on the Manual Adjustments front of the ankle: To manually adjust Kinnex, u�lize the three butons on the front of Press and release the battery button on the front of the Kinnex.
| Instruc�ons for Use PROTEOR | Kinnex 2.0 LED Buton Quick Reference Sheet Each buton on Kinnex incorporates one or more indicator lights to indicate the status of Kinnex. The table below lists what the indicator lights mean. Indicator Light...
| Instruc�ons for Use PROTEOR | Kinnex 2.0 Changing Footwear/Shoe Selec�on Long-Term Storage Mode The change footwear buton will allow you to manually If Kinnex needs to be stored for more than 60 days, it should be change your footwear without use of the Freedom put into long-term storage mode to avoid over discharge of the Innova�ons App:...
| Instruc�ons for Use PROTEOR | Kinnex 2.0 Freedom Innova�ons App for Pa�ents The Freedom Innova�ons App for pa�ents will allow pa�ent to Making Minor Adjustment to Kinnex via App change the following se�ngs of the product via app: By u�lizing the “Adjust” feature in the App, Check battery charge level.
• For Prosthetist Technical Support, please contact PROTEOR. • Electromagne�c Compa�bility Precau�ons The PROTEOR Kinnex 2.0 microprocessor ankle/foot system needs special precau�ons regarding electromagne�c CE Conformity compa�bility (EMC). Specifically, it needs to be installed and The Kinnex is tested and cer�fied to comply with the put into service according to the EMC informa�on provided as...
| Instruc�ons for Use PROTEOR | Kinnex 2.0 Kinnex 2.0 Product Detail A. Keypad buttons B. Charging port C. RapidResponse Valve Technology ™ D. Carbon fiber foot plate Key Pad Buton Func�ons Power Status Buton • Check battery power levels Change Footwear Buton •...
Need help?
Do you have a question about the KINNEX 2.0 and is the answer not in the manual?
Questions and answers