Download Print this page
Medela Symphony Cleaning Instructions
Medela Symphony Cleaning Instructions

Medela Symphony Cleaning Instructions

Reusable pump set

Advertisement

Quick Links

Medela Symphony
REUSABLE PUMP SET CLEANING INSTRUCTIONS
After each use by the same mother
Please refer to the full product instructions for use directions for sterilising the Symphony
reusable pump set if used between different mothers.
1.
Disassemble the pump set into its
individual parts:
– breast shield
– connector and connector lid
– membrane
Check all parts for damage.
Replace damaged or worn parts.
3.
Drying / storage
Dry with a clean cloth or leave to dry on a clean cloth.
Put the clean parts in a clean storage bag or a clean
environment.
Do not store parts in an airtight container/bag. It is
important that all residual moisture dries.
®
2.
Rinse all parts with cold, clear drinking-quality water
(approx. 20 °C).
Clean these parts with plenty of warm, soapy water
(approx. 30 °C).
Use a commercially available washing-up liquid,
preferably without artificial fragrances and colouring
(pH neutral).
Rinse the parts with cold, clear drinking-quality water
(approx. 20 °C).

Advertisement

loading
Need help?

Need help?

Do you have a question about the Symphony and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Medela Symphony

  • Page 1 REUSABLE PUMP SET CLEANING INSTRUCTIONS After each use by the same mother Please refer to the full product instructions for use directions for sterilising the Symphony reusable pump set if used between different mothers. Disassemble the pump set into its...
  • Page 2 Medela Symphony ® SYMPHONY REUSABLE PUMP SET ASSEMBLY INSTRUCTIONS Ensure the membrane is dry. Inspect the entire membrane and valve at the base for any tears, holes or damage. Replace the membrane if it is damaged in any way. Wash your hands thoroughly with soap and water before touching the clean breast pump, the pump set(s) and breasts.
  • Page 3 Medela Symphony ® SYMPHONY REUSABLE PUMP SET ASSEMBLY INSTRUCTIONS Position the Symphony cap firmly Centre the tubing connector in the Close the lid. on the breast pump membrane to recess in the pump housing. form a seal. * Make sure that the Symphony cap engages and lies flush to the surface.