Subscribe to Our Youtube Channel
Related Manuals for Eaton DPM-MC2
Summary of Contents for Eaton DPM-MC2
- Page 1 12/2010 MN04802028Z-EN User Manual replaces M000787-02, 01/2008 DPM-MC2 Communication module...
- Page 2 All rights reserved, also for the translation. None of this document may be reproduced or processed, duplicated or distributed by electronic sytems in any form (print, photocopy, microfilm or any other process) without the written permission of Eaton Automation AG, St. Gallen. Subject to modifications.
- Page 3 No liability is accepted for claims for damages arising from a failure or functional defect in the device. All data specified in this document does not represent warranted properties in the legal sense. Communication module DPM-MC2 12/2010 MN04802028Z-EN www.eaton.com...
-
Page 4: Table Of Contents
Aim and purpose of this document ................5 1.2 Use of the card ......................5 Function and Control LEDs................6 Connector assignment ..................7 Maintenance, repair, disposal ................8 Technical data ..................... 9 Communication module DPM-MC2 12/2010 MN04802028Z-EN www.eaton.com... -
Page 5: Introduction
This can only be used in MICRO PANEL MC2 series devices which are provided with an appropriate slot. The DPM-MC2 card is a PROFIBUS master. This development is based on the EN50170 standard. The card must only be fitted and removed when the device is in a de-energized state. -
Page 6: Function And Control Leds
Hardware fault RUN (green) Communication running Flashing cyclically Communication stopped Flashing irregularly Missing or faulty configuration Dark No communication ERROR (red) PROFIBUS error Dark No error Sends data or token STATUS (yellow) Dark No token Communication module DPM-MC2 12/2010 MN04802028Z-EN www.eaton.com... -
Page 7: Connector Assignment
The bus segment must be terminated at both ends. No more than 2 bus terminations must be activated for each bus segment! At least one of the two bus terminations must be fed by the bus station! Communication module DPM-MC2 12/2010 MN04802028Z-EN www.eaton.com... -
Page 8: Maintenance Repair Disposal
Repairs should only be carried out by the manufacturer or authorized repair centres. Please contact in this case your local MICRO PANEL dealer or the Technical Support at Eaton Automation. The warranty is not applicable if any modifications are made to the device that are not described in this document. -
Page 9: Technical Data
EMC (CE)1) EN 61131-2 Safety 1) EN 60950 UL 60950 (UL) EN 50178, Electrical equipment for use in Product standards 1) electrical installations EN61131-2, PLCs 1) This information refers to the entire Micro Panel. Communication module DPM-MC2 12/2010 MN04802028Z-EN www.eaton.com...
Need help?
Do you have a question about the DPM-MC2 and is the answer not in the manual?
Questions and answers