Skoda CAR RADIO BOLERO - FOR SUPERB Manual page 9

– Briefly press the Set button to terminate the manual frequency selec-
tion and to display once again the lower function keys.
Storing a radio station on a displayed station key
– Continue to press one of the six station keys
the main menu RADIO until a signal tone sounds. The currently heard
radio station is then stored on this station key.
Deleting a radio station from the memory list
– Press the button in the main menu RADIO to open the
Memory
memory list.
– Press the function key
Delete
– Confirm the safety interrogation by pressing
station finally from the memory list.
If the currently heard radio station is already stored in the memory list, the memory
space number is displayed behind the description of the frequency range (FM or
AM).
Use the main menu Setup Radio, to determine which of the six station keys are to
be displayed in the main menu RADIO.
Scan Function
Stations of a waveband can be played briefly one after the other (for ten
seconds).
A
– Press the set button , the radio searches automatically all available
8
stations of the current waveband.
– Alternatively, press the function key
opening pop-up window.
– During the current automatic play the function key will change from
Extras to  Scan .
to displayed in
1 ... 6 ...
behind the station you wish to delete.
Delete to remove the
and press in the
Extras Scan
A
– Press the set button or function key
8
matic play of the currently heard radio station.
RDS function
Switching radio text on and off
– Press the function key
Extras
in the opening pop-up window. Instead of the six station keys, the
window for displaying the radio text is now opened in the lower half
of the display.
– The window for displaying the radio text must fade out again to enable
the station keys to be displayed again. Briefly press on the display
window of the radio text.
– Alternatively, press the function key
shown as highlighted in the opening pop-up window.
Radio text
RDS ("Radio Data System") serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception the suitable RDS radio stations will
display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the memory list.
Traffic information function
Switching traffic information TP (Traffic Program) on or off
– Press on the button , in order to switch the traffic information func-
TP
tion on or off.
The display "TP" in combination with a station name (e. g. in the station or memory
list), indicates a traffic information station.
Basic setting
 Scan again to end the auto-
in the main menu RADIO and
Radio text
and the function key
Extras
7