Skoda CAR RADIO BOLERO - FOR SUPERB Manual page 17

– Activate or deactivate the desired TIM recording time by pressing the
button . If the check-box is active
Active
recording time is activated.
The unit starts with the recording 90 minutes before the set start time and ends the
recording 30 minutes afterwards.
Media set-ups
Call up the menu Setup Media by pressing the selector key
the function key .
Media
Function keys in the menu – Media set-ups
Activate AUX entry – for playback of an external audio source.
- enables a wireless transfer of MP3 data to the telephone
Activate Bluetooth audio
preinstallation.
– according to the set-ups the title and performer
Deactivate performers/Title names
name or only the data and folder name will be displayed for audio CDs with CD
texts and in the MP3 operation.
– plays all MP3 data one after the other
Scan/Mix/Repeat including sub-folder
according to the sequence on the played medium, which are stored in the folders
and sub-folders.
– the input sensitivity of the AUX-IN socket for adjusting the play
AUX Input level
function volume of a connected external audio source can be adapted to other
audio sources in three steps. Press on the function key
the desired input sensitivity in the opening pop-up window. If a multimedia socket
MEDIA-IN is additionally built in, this setting also applies for an iPod connected to
the multimedia socket.
System set-ups
Call up the menu Setup System by pressing the selector key
the function key .
System
 the accompanying TIM
and
SETUP
and select
AUX Input level
SETUP and
Change the system language manually
– Press on the function key
System language
language in the opening pop-up window. The system language is
normally preset to the set language in the instrument cluster
"Automatic". If desired, another language can be selected for the
radio as described.
Resetting the factory settings on the unit
– Press on the button Factory settings
– Confirm the following safety interrogation, the unit will be reset in the
as-delivered condition and all the stored data will be erased.
Rear lighting of the control buttons
– On the unit, you can switch the rear lighting of the control buttons
A
and on or off , if the ignition is switched on.
2 1
2
Phone set-ups
Call up the menu Setup Phone by pressing the selector key
the function key Phone .
Updating phone data in the unit
– Press on the function key Update phone book
the unit, the phone book of the mobile phone or the SIM card entered
since the last connection. This procedure can take a few minutes.
– Confirm the following safety interrogation. The "old" data in the
phone book can still be selected at the unit while the data is being
updated.
– In this case, consult the instruction manual applicable to your vehicle.
Basic setting
and select the desired
.
A
1
and
SETUP
to update all entries in
15