Skoda CAR RADIO BOLERO - FOR SUPERB Manual page 16

14 Basic setting
– Determine the set-ups for the play and display of MP3 data and activate
Media
or deactivate the external connections.
– Change the system set-ups such as voice response and time and cancel
System
or delete stored set-ups in individual areas.
Telephone – Update the phone book in the unit, delete all call lists and modify the
assignment of the shortcut keys.
Radio set-ups
Call up the menu Setup Radio by pressing the selector key
the function key Radio . Press on the
mine from which list in the radio mode the stations are to be selected with
the arrow keys. If the
Memory list
memory list are called up. "Memory" is displayed at the top left in the
main menu RADIO.
Select station keys for display
– Press on the function key behind
Radio .
– In the pop-up window, press and select the station keys to be
displayed in the main menu RADIO.
Switching the RDS function on or off (RDS regional)
– Press on the function key
set-up in the opening pop-up window.
– Press on the button
Automatic
frequency for the heard radio station, which offers the best reception
at the present time.
– When pressing on the button
station emitting regionally long enough until the reception quality is
so bad, that there is a risk of a program loss.
SETUP
Station list or Memory list
is selected, only stored stations from the
in the menu Setup
Station keys
(regional station) and select a
RDS regional
, doing so always chooses the
Fix , the unit attempts to hold a radio
Delete memory list
– In the menu Setup Radio move the sliding regulator to the bottom to
display the function key
– Press the function key
safety interrogation in order to erase all radio stations stored in the
memory list.
Preferred TMC station
If the "preferred" TMC station can no longer be received, the system automatically
searches for the TMC station offering the best reception for the currently driven
and
area. You can determine in the Setup Radio from which TMC station the reports are
, to deter-
to be announced.
Traffic station set-ups
Call up the menu TIM Setup recording time by pressing the selector key
SETUP and the function key
– Press on the left of the display on TIM recording time, in order to open
the menu Time setting.
– In the menu Time setting, briefly press on the arrow keys
the display, below the display of the hours or minutes, in order to
gradually change the respective time unit down or up.
– Keep pressing the corresponding arrow key, in order to continuously
change the time unit. Release the button if the desired value has been
reached.
– Press on the button
recording time and to exit the menu Time setting.
– In this way you can set both desired TIM recording times.
.
Delete memory list
and confirm the following
Erase memory list
Traffic information .
, in order to take over the indicated TIM

or on
 