Alarm.Com ADC-CSVR2008P Installation Manual
Commercial stream video recorder
Hide thumbs
Also See for ADC-CSVR2008P:
- Installation manual (16 pages) ,
- Installation instructions (5 pages) ,
- Quick start manual (3 pages)
Subscribe to Our Youtube Channel
Related Manuals for Alarm.Com ADC-CSVR2008P
Summary of Contents for Alarm.Com ADC-CSVR2008P
- Page 1 Commercial Stream Video Recorder Installation Guide ADC-CSVR2000P / ADC-CSVR2008P / ADC-CSVR2016P...
-
Page 3: Pre-Installation Checklist
Login and password for the Alarm.com account to which you will add the Pro Series CSVR *The Alarm.com Pro Series CSVR is compliant with Section 889 of the NDAA and is not produced by any entity identified on the FCC’s Covered List. - Page 4 Overview ❶ ❺ ❾ Network LED Power input Client RJ45 port ❷ ❻ Status LED Power switch Camera RJ45 port ❸ ❼ Power LED HD Out ports RJ45 PoE Ports ❹ ❽ USB port USB ports ❶ ❷ ❸ ❹ front (same on all devices) ❼...
- Page 5 ❺ ❻ ❼ ❽ ❾ back (ADC-CSVR2008P) ❺ ❻ ❼ ❽ ❾ back (ADC-CSVR2016P)
- Page 6 Recommended networking diagram for CSVR2000P Router to CSVR Client port CSVR Camera port to dedicated PoE switch PoE switch to Alarm.com PoE cameras...
- Page 7 Recommended networking diagram for CSVR2008P/CSVR2016P Router to CSVR Client port CSVR PoE ports to Alarm.com PoE cameras Alarm.com recommends using our Pro Series PoE Cameras with the Pro Series CSVR.
-
Page 8: Led Guide
LED guide Network LED Status LED Blinking green Solid green Client uplink active Connected to Alarm.com Not illuminated Blinking green Client uplink inactive Local network connection Power LED Solid red No connection Solid green Powered on Not illuminated Booting or powered off... - Page 9 Customer Website a) Using a web browser, enter the following URL: www.alarm.com/addcamera. You will need the customer’s username and password to log in to the Customer Website. b) Select the Pro Series CSVR from the video device list or enter its MAC address to begin adding the device.
-
Page 10: Mounting The Device To A Rack
Mounting the device to a rack The CSVR20xxP can be mounted to a standard server rack using the included rack mount kit. The rack mounts are designed to fit into a 1U (rack unit) area. The kit includes the screws needed to attach the rack mount ears to the device, but does not include the screws needed to mount the device into a rack. - Page 11 ❸ Using server rack screws (not included), attach the brackets to each side of the server rack. ❹ Ensure that there is at least 10 in (25 cm) behind the device for proper airflow.
- Page 12 CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. IMPORTANT: The total power budget for the ADC-CSVR2008P POE ports is 120W, ADC-CSVR2016P POE ports is 200W. Every 8 ports (#1 ~ #8 or #9 ~ #16) provides 100W.
- Page 13 Notes...
- Page 14 Notes...
- Page 16 8281 Greensboro Drive Suite 100 © 2021 Alarm.com. All rights reserved. Tysons, VA 22102 210702 | Made in Taiwan...
Need help?
Do you have a question about the ADC-CSVR2008P and is the answer not in the manual?
Questions and answers