Download Print this page

Alarm.Com ADC-SVR122 Quick Installation Manual

Download this manual

STREAM VIDEO

RECORDER

QUICK INSTALLATION GUIDE

SMARTER

ADC-SVR122

VIDEO

SOLUTIONS

Need help?

Do you have a question about the ADC-SVR122 and is the answer not in the manual?

Page 1 STREAM VIDEO RECORDER QUICK INSTALLATION GUIDE SMARTER ADC-SVR122 VIDEO SOLUTIONS...
Page 2: Pre-Installation Checklist
• Ethernet connection to broadband (Cable, DSL or Fiber Optic) Internet • Login and Password for the Alarm.com account to which you will add the SVR Add the Device to an Alarm.com Account Using an Ethernet cable, connect the device to the network.
Page 3 Warning: This will restore factory-default settings to the device. If already installed, the device may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, push the Reset button and release when flashing Green and Red (about 15 seconds).
Page 4 C A M E R A S 1 - 8 Ethernet Solid Green Camera is connected & recording HDMI Flashing Green Recording is paused Power Camera is connected and recording is paused Flashing Red Camera not recording Camera is disconnected or improperly configured ADC-SVR122 Stream Video Recorder...
Page 5: Troubleshooting
(about 15 seconds), then release the button. The device will reboot with factory defaults. If the device was previously installed to an Alarm.com account, it will need to be deleted before it can be M A I N M E N U O P T I O N S installed again.